拓微科技0.96寸OLED处理拖影残影烧屏和crosstalk的UI优化问题显示不均匀解决方案V3.0.pdfVIP

Guideline for Cross Talk Image Sticking Field Application Department April, 2016 TOPWIN OLED DISPLAY General effect on application • Cross Talk • Image Sticking Level □ A □ B □ ■ C TOPWIN OLED DISPLAY Cross Talk – Definition Measurement Level □ A □ B □ ■ C TOPWIN OLED DISPLAY Cross talk - Phenomenon Cause The region becomes darker since the more pixels turned on in the same scan line. Assume the pixel size as 0.2x0.2mm. Supply constant HV with 10V, ignore the RN1~RN96 first. We can simply estimate the following result. 1. All pixels on: Ipixel = 88µA@ 0cd/m2 2. 48 pixels on: Ipixel = 120µA@135cd/m2 3. One pixel on : Ipixel = 180µA@200cd/m2 This is why we use constant current to fix the problem. Also if the contrast setting is too large, the result will be quit similar with above estimation, i.e. we should set the contrast in the linear region in previous page. Level □ A □ B □ ■ C TOPWIN OLED DISPLAY Cross Talk - Improvement Monitor the current distribution of each 16 pixels on All pixels on pixel via driver simulation. We found the current level will not work on the target des