上海乙烯裂解装置安装工程钢结构施工方案.pdf

1 钢结构施工方案 Construction Procedure for Steel Structure 1.1 概述 General 1.1.1 工程概况 Project Introduction 上海乙烯裂解装置安装工程标段Ⅰ共有钢结构约 5819 吨，主要工程量详见表 1.1-1， 包括装置内区域间管廊结构、设备框架结构、设备附属结构及其它零星结构，主要钢结构 全部由 H 型钢柱和钢梁构成，采用大六角头高强度螺栓连接。 There is total 5819 tons steel structure in Shanghai ethylene cracking plant installation work package I. The main amounts of works please see the following table 1.1-1. It includes pipe rack between units of project, steel support frames for equipment, accessory steel structure of equipment other little structural steel. All the main steel structures are made of H-shape columns and beams. They are connected by heavy hexagon steel bolts and nuts. 钢结构工程量一览表 表 1.1-1 序号 项 目 单位 数 量 备 注 1 设备框架、管廊结构 吨 4994 2 设备平台、梯子 吨 748 3 高强螺栓 吨 77 4 防腐 吨 4084 5 防火 吨 910 合 计 吨 5819 框架、平台及螺栓 Schedule of Amount of Steel Structure Works Table 1.1-1 No. Item Unit Amount Note Steel support frame for 1 equipment and pipe Tons 4994 rack Platforms of equipment 2 Tons 748 and stairs High-tensile bolts and 3 Tons 77 nuts 附件 07 施工方案 Appendix 07 Execution Statement Page 1 of 600 4 Preservation Tons 4084 5 Fi