毕业设计（论文）-T10钢淬火过程温度场分析.docVIP

PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT I T10钢热处理淬火过程温度场分析 摘 要：随着当今计算机技术的迅速发展，淬火过程的计算机模拟越来越受到人们的重视，已成为现在淬火过程研究和淬火工艺设计中不必可少的重要方法。本文运用有限元软件ANSYS软件的热分析模块对T10钢圆柱体淬火过程进行建模、网格划分、加载及求解，得到T10钢圆柱体淬火不同时刻的温度场，及T10钢圆柱体上所选特殊点随淬火时间变化的温度场曲线图，建立淬火过程的数学模型。模拟结果与实际情况较为符合，并通过实验结果分析出淬火过程温度场分布对T10钢组织和力学性能的影响。 关键词：T10钢 有限元模拟 温度场 Temperature field analysis of T10 steel during heat treatment quenching Abstract：Along with the rapid development of computer technology today, quenching process of the computer simulation more and more by peoples attention, has become now quenching process research and quenching process design does not have to be less important method. In this paper, the thermal analysis module of finite element software ANSYS software of T10 steel cylinder in quenching process of modeling, meshing, loading and solving, the temperature field of quenching of T10 steel cylinder at different time, and T10 steel cylinder selected special point with the quenching time changes of temperature curve diagram, establish mathematical model of quenching process. The simulation results are in accord with the actual situation and the influence of temperature distribution of the quenching process on the microstructure and mechanical properties of T10 steel is analyzed by the experimental results. Keywords: T10 steel Finite element simulation Temperature field 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc422826867 1 绪论 PAGEREF _Toc422826867 \h 1 HYPERLINK \l _Toc422826868 1.1 研究的目的及意义 PAGEREF _Toc422826868 \h 1 HYPERLINK \l _Toc422826869 1.2 国内外研究进展 PAGEREF _Toc422826869 \h 2 HYPERLINK \l _Toc422826870 1.3 研究的主要内容及研究手段 PAGEREF _Toc422826870 \h 2 HYPERLINK \l _Toc422826871 1.3.1 研究的内容 PAGEREF _Toc422826871 \h 2 HYPERLINK \l _Toc422826872 1.3.2 研究的手段 PAGEREF _Toc422826872 \h 3 HYPERLINK \l _Toc422826873 2 T10钢热处理工艺制定及ANSYS软件 PAGEREF _Toc422826873 \h 4 HYPERLINK \l _Toc422826874 2.1 T10钢材料简介 PAGEREF _Toc422826874 \h 4 HYPERLINK \l _Toc422826875 2.2 淬火加热温度的选择 PAGE