毕业设计（论文）-WIA8.310.0001驱动轴工艺及铣键槽夹具设计.docVIP

I WIA8.310.0001驱动轴工艺及铣键槽夹具设计 摘 要：WIA8.310.0001驱动轴是用在直齿减速箱上的主动轴，属于阶梯轴。轴类零件是机器中经常遇到的典型零件之一。它在机械中主要用于支承齿轮、带轮、凸轮以及连杆等传动件，以传递扭矩，并保证装在轴上零件的回转精度。 本次课题主要是通过对WIA8.310.0001驱动轴进行相关工艺分析，从而制定出切实可行的加工工艺路线，并完成一份WIA8.310.0001驱动轴的二维CAD图的绘制；通过对驱动轴机械加工工艺路线的制定，完成相关的工艺过程卡及工序卡各一份；并完成驱动轴铣键槽专用夹具的设计，绘制一份铣键槽专用夹具的总装图；最终完成WIA8.310.0001驱动轴相关课程设计说明书以及FANUC Series 0I-TC操作说明书8.3-9.5相关英语内容的翻译。 关键词： 驱动轴 加工工艺 专用夹具 WIA8.310.0001 shaft key way milling process and fixture design Abstract：The WIA8.310.0001 drive shaft is the drive shaft used in the straight gear reducer, and belongs to the stepped shaft.The shaft parts are one of the typical parts of the machine..It is mainly used in the machinery to support the gears, pulley, cam and connecting rod and so on, in order to transmit the torque, and guarantee the rotation accuracy of the shaft parts This topic is mainly by the WIA8.310.0001 drive shaft process related analysis, so as to formulate a practical processing route, and completed a WIA8.310.0001 drive shaft of two-dimensional CAD drawing； Through the development of the driving axis machining process route, the related process cards and the process cards each one；And complete the design of drive shaft key way milling fixture, drawing a special fixture of the key way milling assembly diagram;WIA8.310.0001 driver axis related course design manual and Series 0I-TC FANUC instruction 8.3-9.5 translation of English contents Keywords:Drive shaft Process technology Special fixture PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT II 目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc28132 1 绪论 PAGEREF _Toc28132 1 HYPERLINK \l _Toc4818 1.3表面加工路线 PAGEREF _Toc4818 1 HYPERLINK \l _Toc4450 1.4工艺设计所需软件 PAGEREF _Toc4450 3 HYPERLINK \l _Toc1817 1.5小结 PAGEREF _Toc1817 3 HYPERLINK \l _Toc21744 2 驱动轴加工工艺过程 PAGEREF _Toc21744 4 HYPERLINK \l _Toc5353 2.1毛坯的设计 PAGEREF _Toc5353 4 HYPERLINK \l _Toc30001 2.1.1计算零件年生产量 PAGEREF _Toc30001 4 HYPERLINK \l _Toc23987 2.1.2确定毛坯尺寸 PAGEREF _Toc23987 4 HYPERLINK \l _Toc26