应用于无尾家电的非接触式无线能量传输技术-Engineering.PDFVIP

20 14 年 9 月 电 工 技 术 学 报 Vol.29 No. 9 第29 卷第 9 期 TRANSACTIONS OF CHINA ELECTROTECHNICAL SOCIETY Sep. 2014 应用于无尾家电的非接触式 无线能量传输技术 张剑韬 朱春波 陈清泉 （哈尔滨工业大学电气工程及自动化学院 哈尔滨 150001 ） 摘要 基于磁耦合谐振原理，采用平板磁心能量传输结构，可实现家用电器无尾化，从而避 免插电式充电所带来的安全隐患。本文提出的无线能量传输系统采用一次侧加磁心，二次侧不加 磁心的不对称结构，一方面实现了高功率、高传输效率的无线充电过程；另一方面减小了二次侧 的尺寸、体积和重量。首先，本文建立了系统磁耦合谐振模型并优化了谐振参数；其次，仿真得 到一、二次侧之间的空间耦合系数分布曲线；最后，通过搭建系统硬件平台，实现了60～150mm 距离的无线能量传输，传输功率为700W ，传输效率最高可达80%。 关键词：电气工程 无线能量传输 无尾家电 磁心 中图分类号：TM724 Contactless Wireless Energy Transfer Technology Applied to Tail-Free Household Appliances Zhang Jiantao Zhu Chunbo Chen Qingquan （Harbin Institute of Technology Harbin 150001 China ） Abstract Based on the principle of magnetic resonance, tail -free household appliances can be obtained by using the energy transmission of the flat magnetic with a core to avoid security risks brought by the charging means of plug-in. The wireless energy transfer system associated with this paper i s based on the structure of a primary winding with a magnetic core and a secondary winding without a magnetic core. A high power and high transfer efficiency in the wireless charging process and a reduced secondary in the dimension, volume and weight are achieved by using the system. Firstly, a magnetic coupling resonant model is established and the resonant parameters are optimized. Then a distribution curve of a coupling coefficient is obtained via the simulation. Finally, a wireless transfer distance of 60 millimeter to 150 millimete