基于数据挖掘的振动数据模式匹配研究-计算机应用技术专业论文.docxVIP

Subject : Research on Vibration Data Pattern Matching based on Data Mining Specialty : Computer Application Technology Name : Shi Xin (Signature) Instructor : Li Aiguo (Signature) ABSTRACT Discovering the characteristic of vibration data are beneficial to identify the target and state in monitor environment, which have great academic value and practical significance in the area of security defense. With careful study and comparison of several classification methods, this paper explores a new method to identify pattern of vibration data. The model of vibration amplitude and distance is built, and the location of the vibration source is judged by the model. At the same time, a prototype software system was developed. The main contents are as follows: According to the problem of the low pattern recognition rate of the vibration source, a k-Nearest Neighbors method based on projection scale (KNNPS) is proposed. The method introduces the concept of projection scale. First, the independent component analysis (ICA) is used to separate noise from the signal. Then the discretization of continuous attributes is used to descend dimension. Finally, the similarity is measured by projection scale, and the pattern of vibration signal is matched. The accuracy rate, error rate, detection rate and pattern matching rate are used to evaluate the performance of KNNPS, KNN, and NB algorithms. The experimental results show that the KNNPS algorithm outperforms the KNN and NB algorithm. Through analyzing the results of the classification，the number of the vibration source can got by the category of classification, and the distance of vibration source can got by strength of the vibration amplitude of the same category. The location of the vibration source cannot be correctly estimated by strong and weak of the vibration amplitude, so the amplitude of fade model is built to obtain the distance of vibration source. The distance of vibration source is estimated effectively by single sens