毕业设计-磁流变弹性体挤压工作模式减振结构的概念设计及有限元分析.doc

- PAGE I - 本科毕业论文 （20 届） 磁流变弹性体挤压工作模式减振结构的概念设计及有限元分析 所在学院 专业班级 机械设计制造及其自动化 学生姓名 学号 指导教师 职称 完成日期 年 月 PAGE IV PAGE 27 摘　要 【摘要】磁流变弹性体是一种具有特殊性能的智能流变材料。通过软磁性材料混合入弹性体中从而形成磁流变弹性体，因此它具有一些特征，如响应速度快，精确可控性，小能量和较宽的工作温度范围等优异功能使得磁流变弹性体的技术迅速发展，并成功地运用在各个领域，尤其是在振动控制。然而大多数磁流变弹性体设备都是在剪切模式下设计的，在这种模式下压力较低以至于不能完全达到工业要求。同样的情况换在挤压模式下可以获得更高的压应力，因此这种方法吸引了众多研究者新的兴趣。本论文通过采用磁流变弹性体作为核心元件，设计出几种挤压工作模式下的减振结构。并通过有限元分析设计中的磁场分布。 【关键词】磁流变液；挤压模式； 有限元分析；减振控制 【ABSTRACT】Magnetorheological elastomer is an intelligent rheological material which can be artificially controlled and it is made by the soft magnetic material mixed into the elastomer with peculiar performance. Excellent features like fast response, precise controllability, small energy and wide working temperature range make Magnetorheological elastomer technology develop and apply successfully in various fields, particularly in the vibration control. Most MRE devices were designed in the shear mode, but the stress is too low to solve the industrial needs, which is the major reason that MRE technology could not be applied widely. However, the compressive stress can be obtained much higher in the squeeze mode. So this approach had attracted new interests of many researchers. By using magnetorheological elastomer as the core component, this thesis designed several extrusion mode damping structures. The finite element analysis was used to analyze the magnetic field of the design. 【KEYWORDS】Magnetorheological elastomer; Squeeze mode; Finite element method magnetics ; Vibration control  目　录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc292955504 摘　要 PAGEREF _Toc292955504 \h II HYPERLINK \l _Toc292955505 Abstract PAGEREF _Toc292955505 \h III HYPERLINK \l _Toc292955506 目　录 PAGEREF _Toc292955506 \h IV HYPERLINK \l _Toc292955507 1 绪论 PAGEREF _Toc292955507 \h 1 HYPERLINK \l _Toc292955508 1.1 选题的背景与意义 PAGEREF _Toc292955508 \h 1 HYPERLINK \l _Toc