基础隔震砌体结构的数值试验研究及施工应用-建筑与土木工程专业论文.docxVIP

摘要 earthquake energy, to reduce the earthquake response of upper structure. But because the small stiffness of isolation layer, under strong earthquake isolation layer of large deformation, when the deformation exceeds a certain range may cause the destruction of isolation structure, compared with the traditional structure which is the isolation structure defect. At the same time, the engineering seismic isolation structure construction has its characteristic different from traditional structure construction, it needs continuous conclusion and perfectibility. Therefore, deformation, failure mechanism analysis of base isolated structure, carrying out experiments on actual engineering model, summarizes the characteristics and laws of seismic response of base isolated structures, and put forward concrete measures to guide the construction, and has important theoretical significance and practical value. In this paper the classification of seismic building structures and seismic concept design, seismic design objectives and basic requirements on the basis, the damping system of building structure, rubber bearing isolation of working mechanism, basic structure and basic mechanical properties were summarized and analyzed. Combined with practical engineering, established the experimental model, for seismic multi parameter comparison, analysis under frequently occurred and seldom occurred earthquake, summed up the law of seismic response of base isolated structure. In addition, through participation in the construction example base isolated building process, the main link should pay attention to the construction of base isolated building and the main construction measures, on the properties of laminated rubber bearings base isolation system in engineering is evaluated, to illustrate the relationship between building size and isolation support, the isolation system are carried out from construction to describe the effect. The key of this paper is combined with the engineering