基于物联网技术的自动需求响应-电测与仪表.DOCVIP

第xx卷第xx期电测与仪表 Vol.xx No.xx xx年第xx期 Electrical Measurement Instrumentation Dec.xx —PAGE 6— 基于物联网技术的自动需求响应 系统架构与应用方案研究* 沈敏轩1,2, 孙毅1，李彬1 （1. 华北电力大学，北京，102206；2. 中国电力科学研究院，北京，100192） 摘要：本文通过部署双向互动设备和负荷控制设备等，结合物联网技术，设计基于物联网技术的自动需求响应方案，该方案针对不同的电力消费行为模式，实现用电设备的监控；制定需求响应控制策略指导用户参与电网削峰填谷，并根据收集到的用户用电量变化数据，分析用户用电行为的变化，及其对电网负荷的影响。从而优化终端用户的用能结构，提高电能利用效率，节约用户电能消费，实现自动需求响应，降低电网负荷峰谷差，提高电网运行效率。 关键词：物联网；自动需求响应；终端设备；通信网络 中图分类号：TM933 文献标识码：B 文章编号：1001-1390（2014）00-0000-00 Research of on the Architecture and Application of the Automated Automatic Demand Response System Based on the Technology of Internet of Things Technology SHEN Min-xuan1,2 , SUN Yi1, LI Bin1 （1. North China Electric Power University, Beijing, 102206, China; 2. China Electric Power Research Institute, Beijing, 100192, China) Abstract：: In this paper, tThrough the deployment of the two-way interactive equipment and load control equipment, and combined combination with the Internet of things, we this paper designed the automated automatic demand response scheme based on the technology of the Internet of things, . according to In view of different power consumption behavior models, it this scheme realizes realized the monitoring of the electrical equipment, makes formulated demand response control strategy strategies to guide users to participate in the peak load shifting of the power grid peak load shaving, and analyzes analyzed the change of the users’ power using consuming behavior and its influence to impact on the power grid load according to the power change data collected from the users data. So Thereby it can optimize the power energy using energy structure of the end-users was optimized, energy utilization efficiency was improved energy utilization efficiency, and energy consumption was saved energy consumption, so as to realize Aautomatic demand response, reduce the peak valley difference of the po