绝缘子窑炉控制系统的研究与设计-控制工程专业毕业论文.docxVIP

内蒙 内蒙古科技大学硕士学位论文 II II Abstract In recent years, with the rapid development of electric power industry, electrical porcelain products are needed largely, also our country has become a great nation of electrical porcelain manufacture. Shuttle kiln is a representative of the batch industrial heat treatment furnaces, it is also the main heating equipment of porcelain products, inorganic materials, ceramic arts and crafts. The sintering process is the most important part in the whole products production process, So there is a firing process under effective control in shuttle kiln, it is a important significance to improve product performance and quality. There are a lot of difficulties in the traditional electrical control shuttle kiln, including establishing mathematical model, especially some problems such as big lag and serious nonlinear, it is difficult to obtain satisfactory results. For these problems that distribution of temperature, atmosphere is uncontrolled, pressure regulating trival in the shuttle kiln operation process. According to the numerical model that by analyzing gas calorific value data in the furnace and advantages of PID control method in all kinds of temperature control system, The control method is proposed expert system combining with PID control way. This paper expounds the total control scheme of the shuttle kiln and analyzes deeply burner combustion subsystem and voltage regulation system, also makes use of the methods that fitting a given firing temperature curve, to solve the difficulties that control the temperature in the operation of the kiln. The paper is based on expert system, sums up and writes into the expert knowledge base, through reasoning self-learning online, access to the PID controller parameter value, it realizes the fast response. After comprehensive analysis of electrical porcelain production technology, based on the various requirements of system, it chooses programmable logic controller and inverter, through device sel