空间曲面电火花线切割加工CAD应用技术研究-机械制造及其自动化专业毕业论文.docxVIP

佳木新大学顼士学使论文摘 佳木新大学顼士学使论文 摘 要 随着科学技术的不断发展，模具、航天等行业中一些批量不大、精度疆求高的复杂 鼗}霞零传，仅仅依靠传统懿切副方法缀鼹实现这些零l孛的热工。本文是饕予黑龙江雀羹 然基金项目“空间曲丽电火花线切割加工CAD技术研究”和慧龙江省杰出青年科学基 众项目“空间曲面电火花线切割加工CAD／CAPP／CAM一体化技术研究”的研究过程而 开展豹，霹空漓篷蟊魄炙花线韬裁麓工CAD技未邀行了大量研究工捧。主要工露及取 得的成果体现在以下几个方面： 本文对密闭魑蘑鼹火花线甥剡五辘联渤趣工CAD系统进行了全嚣深入静搽讨，确 定其支撑系统，从数掰结构与系统功能方面全面分析了该系统的结构体系。以计算机图 形学和解析几何学为理论基础，应用计算机仿真技术，实现了零件形态仿真和加工过程 谚囊功藐。在最置楚璞模凌中，可魏鑫动生成适臻予PMAC控潮器豹黧工{弋玛，这为 空间曲面电火花线切割五轴联动加工CAM系统提供了接口。通过对仿真结果的分析， 验证了空闻姻西电火旋线切害《炙辘联动加工系统的数控模型的正确性，固辩找出该数控 模翟的局限性并加以修正，从而扩大了该数控模型的应用范围，简化了转摆摆工作台在 结构设计方顾的复杂程度。 关键逶：惫火莛线甥割力l工；空阕基瑟；CAD；数按模型；转摆摆工稼念 佳本赣大学硕圭学位论文Study 佳本赣大学硕圭学位论文 Study on CAD application technology of machining complex curved surface by WEDM Absttact With the constant development ofscience and technology,small batches ofhigh precision work-pieces with complex curved surface are oRen needed in the induslries ofmould．aviation and SO on，and it is usually impossible to machine those work-pieces only by traditional cutting methods．This paper makes a lot of researches on the Computer Aided Design(CAD) technology of machining complex curved surface bY WEDM．These researches base On the items of“Study on CAD technology of machining complex curved surface bY WEDM”and ”Study on eADfC§母Pfc枞technology ofmachining complex curved surface by WEDM’、 which are subsidized by the naR．1re science fund and the science fund ofthe outstanding youth in Heilongjiang Province separately．111c main work and results are as the following： By studying the five axes linkage machining CAD system of machining space curved surface by WEDM，the support system of it iS established，and its architectonic system is analysed roundly from the data slTueture and systemic function angles，Based on the theories of computer graphics and an￡dytica!geometry,the functions ofpart’S conformation simulation and nmchining process simulation ale realized by applying the computer simulation technology．At the same time,machining codes whi馥ale the salTle with PMAC are created automatically in the pos