黄河茨哈峡水电站引水发电进水口倾倒体边坡成因机制及稳定性分析-岩土工程专业毕业论文.docxVIP

IV IV 成都理工大学硕士学位论文 On the theory, the rock toppling deformation is divided into four stages: initial state namely rock formation non-deformation stage; unloading and rebound, steep crack stage; rock bending、tension crack surfaces to expand depth and to lapse slope-back stage and rock because of bending extent too great from root breaking、 crushing stage. The intake slope tilting body is mainly cause by slope topography and structural characteristics、steep thin-layered rock、insitu stress direction and rock diversity unloading and rebound. By site to statistic analysis flat hole and drilling hole inclination angle of rock stratum: tilting body on the section spreading, its toppling depth has the consistency with rock strongly weathering zone and strongly unloading zone; on the Characteristics of toppling body plane distribution, number 10 tilting body mainly spreads over some prominent mountain ridge, up-down stream boundary is separately two larger gully, bottom altitude is between 2849m and 2853m, top elevation is next to slope flat roof. From the structural characteristics analysis of intake slope, the structural surface of intake slope is divided into Ⅲ、Ⅳ、Ⅴ three stages, meanwhile, Ⅳ、Ⅴ interlayer structural plane being the most development. Adopt the method of field qualitative classification and SMR quantitative classification to classify slope rockmass quality. In the high side slope intake with layered structure, under the influence of rock dumping and deformation, Ⅳ-order rock dominate toppling range of rock. Ⅲ2-order rock is main in the rock around dumping bottom boundary. Because rock inside toppling have generally entried moderately weathered zone, Ⅲ1-order is main. On the base the intake slope growth structural plane statistics, adopting stereographic projections analysis、block theory and limit equilibrium method to analysis and study block stability and integral stability which slope is under various working conditions. Under slope block stability and i