煤矿矿井嵌入式数据采集分站的研究与实现-通信与信息系统专业毕业论文.docxVIP

武汉理工大学硕士学位论文Abstract 武汉理工大学硕士学位论文 Abstract Coal mine data collection substation iS the hinge between the safety．monitoring module under the mine and the safety-monitoring center above the mine．it takes charge of data collection and communication between the safety-monitoring module and the safety．monitoring．It is determined by data collection substation that wether the coal mine safetY．monitoring can W0rk e衔ciently,and the data collection plays important part in the coal mine safety-monitoring． Aiming at the requests．high performance删7 chip LPC2292 is adopted器 main processor by t11is PapeL ThrougIl the SPI，the Ethemet controller chip iS driven and the TCP／IP communication is realized．Throu吐the inner CAN controller of ARM．the CAN communication is realized fits well．Embedded real-time operation system ItC／OS．11 which iS transplanted to the project．the whole system has the features ofhigh reliability and strong expand ability． nle main topic of this paper is the design of TCP／IP communication module which is being introduced detailedly around each independent module of COal mine data collection substation．nle power and reset module．CAN communication module。 LCD display module．rework and storage for parameter module are introduced as well． On the foundation of the hardware design,the softavare design based on oporation system rtC／OS．II iS processed．The software design contains two parts．One is hardware driver program,another is system task．Driver program contains the realization process of each module．and the realization process of TCP／IP communication is mainly introduced．According to the practical function of each module of the substation,the PRI of tasks is assigned and the design flows of COal mine data collection substation’s tasks are introduced in the system task part．． In the whole system design,each software design and hardware design adOpt the anti-jamming method in order to enhance EMC ability．The whole system is nmning well in practice．and the effectively da