铝合金含气量的预测-材料加工专业毕业论文.docxVIP

沈阳理工大学硕士学位论文 沈阳理工大学硕士学位论文 Abstract This paper made use of designing spinning rotor degassing of simulating equipment by ourselves, and observed the course of air bubble building and crashing and floating, the experimental results showed that, the effect of simulated course on the gas flux and the rotate speed and gas stress and so on. Meanwhile, it adopted that spinning rotor degassing methods of validating liquid simulated course by the casting aluminum 106. In this thesis, based on the purification method of molten Al alloy when using SGJ-I detecting instrument of the aluminum liquid refining effect to gain some kind of sample density, and analyze the rule among the surface pressing of aluminum and the cooling velocity and the crystallizing point and the hydrogen content with the casting poring form in definite condition, at the same time, a series of experiments have been made to gain the sample density in different time of removing gas, and analyze the relationship between the refining time and density. The results showed the density of reflecting the hydrogen content in aluminum alloy, and this result by way of accounting beginning condition of the mass transfer coefficient. This paper studied the corresponding relationship between the coefficient and the refining time in aluminum, and utilized the mass transfer coefficient to forecast the density with different time of removing gas in practical factory. Key words：aluminum alloy；hydrogen content；forecast；pore 沈阳理工大学 硕士学位论文原创性声明 本人郑重声明:本论文的所有工作，是在导师的指导下，由作者本 人独立完成的。有关观点、方法、数据和文献的引用已在文中指出， 并与参考文献相对应。除文中已注明引用的内容外，本论文不包含任 何其他个人或集体已经公开发表的作品成果。对本文的研究做出重要 贡献的个人和集体，均己在文中以明确方式标明。本人完全意识到本 声明的法律结果由本人承担。 作者（签字）： 日 期 ： 年 月 日 学位论文版权使用授权书 本学位论文作者完全了解沈阳理工大学有关保留、使用学位论文 的规定，即：沈阳理工大学有权保留并向国家有关部门或机构送交学 位论文的复印件和磁盘，允许论文被查阅和借阅。本人授权沈阳理工 大学可以将学位论文的全部或部分内容编入有关数据库进行检索，可 以采用影印、缩印或其它复制手段保存、汇编学位论文。 （保密的学位论文在解密后适用本授权书） 学位论文作者签名： 指导教师签名： 日 期： 日 期： 第 第 1 章 绪 论 第 1 章 绪论 1.1 选题意义 铝是用途最广的有色金属，其储量大、开采冶炼多，具有密度小、重量轻、 比强度高、外观漂亮、价格适中、导电与导热性好、较好的耐蚀