脉冲涡流测厚技术研究-控制理论与控制工程专业毕业论文.docxVIP

西安理工大学项士学位论文RESEARCH 西安理工大学项士学位论文 RESEARCH ON THE METAL THICKNESS MEASUREMENT OF PULSED EDDY CURRENT Speciality： Control TheoryControl Engineering Author： Zhang Zhen Signature： Supervisor：Prof．Zheng Gang Signature Abstract Now,in the industry manufacture and equipment testing，there are several methods for the metal thickness measurement，as ultrasonic，X-ray,eddy current and on．One of these testing methods，eddy current，has been widely used for metal thickness measuring because of its good sensitivity,high test speed，non—contact and other advantage．The principle of eddy current testing is that，when the test coil is close to the metal conductor with alternating current，the eddy cmTent would be inducing in the conductor,and correspongdingly,the eddy current would affect the original magnetic field，the result is the coil’s impedance and inducing voltage changed．So we get the information of metal from analyze the change． Pulsed eddy curreot techniques is new nondestructive testing technology developed in recent years，which contains a string of frenquencies and more information than conventianl eddy current techniques，but lift-off effects is still main obstacle for this ncw technology． This study mainly shows how to alleviate lift—off effects for measurement of non-ferrous metal thickness via introducing lift—off intersection point(L01)to analyze pulsed eddy current signals．The results from simulation and experiment show that applying LOI information to metal thickness measurement get well effect and achieve accurate measurement．At last，on the base of experiment，a equipment of PEC thickness measurement is built up． Finally,the conclusion of this paper is given and the suggestion for further research is provided． Key words：pulsed eddy current；ND T，lift-off effect；LOI；thickness measurement II 独创性声明秉承祖国优良道德传统和学校的严谨学风郑重申明：本人所呈交的学位论文是我个 独创性声明 秉承祖国优良道德传统和学校的严谨学风郑重申明：本人所呈交的学位论文是我个 人在导师指导下进行的研究工作及取得的成果。尽我所知，除特别加以标注和致谢的地 方外，论文中不包含其他人的研究成果。与我一同工作的同志对本文所论述的工作和成 果的任何贡献均已在论文中作了明确的说明并已致谢