绝缘子工频电场逆向检测及优化方法研究电气工程专业毕业论文.docxVIP

重庆大学硕士学位论文英文摘要 重庆大学硕士学位论文 英文摘要 PAGE PAGE IV Abstract With the expansion of power grid scale and the development of UHV technology, increasing attention to running safety of power networks has been paid by people, and much stricter safety standard of power networks has been commanded by the state. The preventative detection of insulators became an urgent problem need to solve in view of the importance of insulators in power networks. The method of inverse detecting faulty insulators realizes the detection of faulty insulators by inverse calculation of voltage distribution on the surface of insulators, taking electric field as input data. The analysis of relation between field and source near the insulator string and the research of optimization algorithms are the key problems, the research works are as follows: ① The basic principle of simulation charge method and basic concept of electrotechnical inverse problem have been discussed at first. The basic approach of detection method using inverse problem principle has been formed on the basis of analysis of traditional detecting method of insulators and solving method of inverse problems. ② The simulation charge method has been used to establish forward problem calculation model for power frequency electric field of insulators and Genetic Algorithm has been used to optimal allocation of simulation charges, optimized the quantity of simulation charges on the premise of fixed-site. The fast multipole method has been embedded in the calculation process to improve the product efficiency between the vector and matrix. It was also verified the effectiveness and advantage in computational efficiency aspect through the model bar-plane. On the basis of this, the simulation calculation for forward problem of 110kV line insulators has been analyzed. Reliable accuracy and engineering practicability of electric field forward problem can be clearly demonstrated, so the forward calculation for electric field of insulator