基于UG的变速箱设计及CAM技术研究_毕业论文.doc

基于UG的变速箱设计及CAM技术研究 沈阳航空航天大学毕业设计(论文) PAGE \* MERGEFORMAT II PAGE \* MERGEFORMAT I 基于UG的变速箱设计及CAM技术研究 摘 要 现今，机械行业广泛采用CAD/CAM技术，并通过数控机床进行加工，大大缩短了产品的开发和制造周期，提高了产品的技术含量，降低了成本。 本论文中详细的阐述了变速箱的三维建模和数控编程过程，应用UG实现了零件的三维建模，在UG环境中进行了数控仿真加工，并生成了NC仿真加工程序。 论文共分四个部分，在第一部分简单的介绍了CAD/CAM技术；第二部详细介绍了基于UG的三维实体建模；第三部分详细介绍了基于UG的数控加工技术；第四部分讲述了经济性分析。 本课题通过对变速箱箱体零件设计加工过程的分析，以UG软件为基础，对变速箱箱体进行了设计，并对其进行了加工工艺分析，同时运用UG软件对其进行了数控加工，实现了从设计到生产的一体化，对实际生产有一定的指导意义。 关键词：CAD/CAM；变速箱；三维建模；数控加工；仿真模拟；NC代码 Gearbox design based on UG and CAM technology Abstract At present， the machinery industry widely used CAD / CAM technology and the numerical control machine tool for machining through the process, greatly reducing the product development and manufacturing cycle,improving the technology of products, and to reduce the cost. Paper describes in detail the transmission of three-dimensional modeling and numerical control programming. The application of UG realizes three-dimensional modeling of parts in UG CNC simulation environment for the conduct of the process, and generates the NC machining simulation program. Thesis is divided into five parts. In the first part introduces CAD/CAM briefly; The second section details the three-dimensional solid modeling; The third section details based on UG CNC machining technology; The fourth section describes the economic analysis. This topic through parts of gearbox design process analysis to UG software based on the transmission box was designed, and its analysis of the machining process, while the use of UG software from CNC processing to achieve the integration from design to production, actual production has some significance. Keywords : CAD/CAM ; gearbox ; three-dimensional modeling ; CNC Machining ; Processing simulation ; NC code ; 目录 TOC \o 1-3 \h \u 数控系统组成的使用于加工复杂形状工件的高效率 自动化机床。加工中心又叫 电脑锣。加工中心备有刀库，具有自动换刀功能，是对工件一次装夹后进行多工序加工的 数控机床。加工中心是高度 机电一体化的产品，工件装夹后，数控系统能控制 机床按不同工序自动选择、更换 刀具、自动对刀、自动改变主轴转速、进给量等，可连续完成钻、镗、铣、铰、攻丝等多种工序，因