煤矿井下自燃危险区域无线信号衰减规律研究-安全科学与工程专业毕业论文.docxVIP

万方数据 万方数据 Subject : Research on Wireless Communication Attenuation Characteristics in Dangerous Region of Coal Spontaneous Combustion Specialty : Safety Science and Engineering Name : Li Zhenbao (Signature) Instructor : Deng Jun (Signature) ABSTRACT It is important to coal spontaneous combustion prevention and controlling that feature information extraction in dangerous region. The monitoring methods currently used have many defects. Wireless communication network is widely used in mine production because of its low cost, low power, highly scalable high coverage, configuration and flexible networking. But now it’s mainly used for environmental monitoring of the underground tunnel. There is few study in gob-side entry, enclosed areas and rock-coal mass. Wireless communication characteristics of these three areas are studied in this paper. This paper researched on wireless communication frequency and attenuation characteristics in dangerous region of coal spontaneous combustion. Wireless communication environment and transmission loss factors in of these three areas are analyzed, coal-rock mass belongs to the dissipative medium, the process of electromagnetic transfer mainly affected by coal-rock electrical parameters and communication frequency. Gob-side entry belongs to limited space, the process affected by the influence of coal-rock electrical parameters, laneway surface section size, roughness and electromagnetic interference. The attenuation models of wireless communication are established in coal-rock mass and gob-side entry. Through theory calculating, the communication frequency in coal-rock mass should no more than 1MHz when skin depth is 5 meters. The cut-off frequency in gob-side entry is 291MHz. Considering electromagnetic interference, the optimizing frequency need no more than 500MHz. Wireless communication characteristics of coal-rock mass and gob-side entry are simulated by MATLAB software, the quantitative relationship between attenuation coeffic