- 6
- 0
- 约1.5万字
- 约 24页
- 2019-05-15 发布于广西
- 举报
w
w
超声皂洗对锦纶纤维染色牢度的影响
摘 要
本论文主要是针对锦纶织物酸性染料染色后湿处理牢度较低的问题进行了研究,实验中利用超声波对染后织物进行皂洗,从而提高锦纶染色织物的湿牢度。相比于传统的皂洗工艺,在皂洗时增加了超声波,利用其在液体中的“空化效应”所产生的冲击波,影响纤维与染料之间的作用,并且尽可能去除浮色,来提高织物染色牢度。在实验过程中分别对影响皂洗的主要因素(处理液浓度、处理时间、处理温度、浴比及超声波的频率等)进行研究,并测量皂洗后织物的色牢度及其它性能指标,从而最终得到超声皂洗的优化工艺:
皂片浓度:2g/L
皂洗温度:50℃-60℃
皂洗时间:30min
皂液浴比:1:60
超声频率:40KHz
关键词: 锦纶织物 酸性染料 超声波 皂洗 色牢度
Influence of ultrasonic soaping on color fastness of the polyamide fiber
Abstract
This paper mainly studies the problem of low wet fastness of polyamide fabric dyed with acid dye fiber. In the experiments, dyed fabrics are soaped in the presence of ultrasound, in order to improve the wet fastness of dyed polyamide fabric. Comparison with the traditional soaping process, the ultrasound treatment is used in the soaping. the shock waves produced by the cavitation effect of ultrasound in liquid will affect the action between fibers and dyes, and remove the surface dyes as much as possible. As a result, this process improves the color fastness of fabric. The main factors (concentration of treatment solution, treatment time, treatment temperature, liquor ratios, ultrasonic frequency etc.), which influence the soaping process, are investigated, and the color fastness and other performance indexes are measured. At last the optimized conditions of soaping with ultrasound are concluded:
Concentration of Soap: 2 g / L;
Temperature of Soaping: 50℃-60℃;
Time of Soaping: 30min;
Liquor Ratios of Soaping: 1:60;
Ultrasonic frequency: 40 KHz.
Key words: polyamide fiber;acid dye;ultrasound;soaping;color fastness
目 录
TOC \o 1-3 \u 摘 要 h I
Abstract h II
目 录 Ⅲ
第一章 前言 h 1
1.1 锦纶纤维的简介 h 1
1.2 酸性染料染锦纶存在的问题 2
1.3 选题意义 3
第二章 原理 4
2.1 酸性染料染锦纶的机理 4
2.2 普通皂洗的机理 4
2.3 超声皂洗的机理 4
第三章 实验及分析 6
3.1 实验材料、药品 6
3.2 试验仪器 6
3.3 测试标准 6
3.3.1 干/湿摩擦牢度的测试 6
3.3.2 耐皂洗牢度的测试 6
3..3.3 汗渍牢度的测试 6
3.3.4 熨烫牢度的测试 7
3.4 实验步骤 7
3.4.1 锦纶纤维的染色 7
3.4.2 皂洗处理 7
3.5 结果分析 8
3.5.1不同皂洗条件对耐皂洗褪色牢度的影响 9
3.5.2 不同皂洗条件对耐皂洗沾色牢度的影响 9
3.5.3 不同皂洗条件对干摩擦牢度的影响 10
3.5.4 不同皂洗条件对湿摩擦牢度的影响 11
3.5
您可能关注的文档
- 毕业论文:苯乙烯装置的控制系统及管理软件的设计.doc
- 毕业论文:泵盖的数控加工工艺与仿真.doc
- 毕业论文:比较优势理论在中国对外贸易中的应用.doc
- 毕业论文:比亚迪汽车营销策略分析.doc
- 毕业论文:毕节朱昌草炭的热电性能评价.doc
- 毕业论文:毕业论文《玻璃表面[C8tespim]PF6薄膜的制备及其润湿性研究》.doc
- 毕业论文:毕业论文《成都方言声调的实验研究》.doc
- 毕业论文:毕业论文《基于MATLAB的实时声信号与谱分析设计毕业论文》.doc
- 毕业论文:毕业设计外文翻译--汽车模具和先进的冲压CAE技术的探索过程及对商业的影响.doc
- 毕业论文:壁挂式空调制冷与制热运行的数值模拟.doc
原创力文档

文档评论(0)