立式合模机构力学性能分析-机械设计及理论专业论文.docxVIP

浙江下业人学颂：}：学位论义5、实验验证。设计实验方案，完成了橡注机在不同工况下，其合模机构关 浙江下业人学颂：}：学位论义 5、实验验证。设计实验方案，完成了橡注机在不同工况下，其合模机构关 键部位的应变和位移的数拂：采集。根掘测得的实验数据与数值计算结果进行比较 分析，验证了橡注机合模机构力学分析的正确性及本文关于立式合模机构分析的 快速建模方法的有效性。 6、基于正交实验的优化分析。对合模机构的关键部件按照『F交试验方法安 排试验，用数值仿真技术获得所有优化分析所需的的试验数据。从试验数据的级 差分析结果，研究试验范围内参数对合模机构关键部件的应力幅值影响关系，从 而得到一组最优的设计方法，合理优化了合模机构，提高了合模机构的使用寿命。 本文探索出了立式合模机构力学分析的快速建模方法，为立式合模机构进行 力学分析提供了高效的分析途径，解决了工程实际关于合模机构失效急需解决的 问题。而合模机构关键部件的优化为橡注机合模机构结构优化设计提供了依据， 提高了橡注机的使用寿命。 关键词：数值分析，快速建模，接触，疲劳寿命，优化设计 浙江T业大学坝。j：学位论义MECHANICAL 浙江T业大学坝。j：学位论义 MECHANICAL PROPERTIES ANALYSlS OF VERTICAL CLAMP MECHANISM Abstract Vertical clamp mechanism，Clamp Mechanism for short，is a kind of important fast production device．It can realize continuous production for different shape products by mold，including vertical rubber injection，vertical plastic injection， vertical die-casting and clamp mechanism as a key part．As a main loaded component， it affects the production efficiency，processing properties，precision of product，the gross weight and COSt of the machine．Because the Clamp Mechanism serves in the poor condition，such as the heavy clamping force．high temperature and alternating load，it has high demand on structure properties of Clamp Mechanism．At present， there has found some pillars broken within working about 1 year in some enterprises． So it is very important to carry on mechanics properties analysis，calculate fatigue life of the key part．optimize the structure of the clamp mechanism and improve its service life． Focused on destroy phenomenon under proper condition and structure characteristics of the vertical clamp mechanism，the working condition of clamp mechanism is studied and fast calculation method suited for clamp mechanism is researched in this paper．Take rubber injection as an example，fast calculation of clamp mechanism is established．the reasons of destroy is founded out and numerical analysis is proved through the experinaent．Based on fast calculation mold，the optimization method was used tO optimize the