路桥过渡段病害防治措施分析-岩土工程专业论文.docxVIP

路桥过渡段病害防治措施分析-岩土工程专业论文.docx

  1. 1、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。。
  2. 2、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  3. 3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
  4. 4、该文档为VIP文档,如果想要下载,成为VIP会员后,下载免费。
  5. 5、成为VIP后,下载本文档将扣除1次下载权益。下载后,不支持退款、换文档。如有疑问请联系我们
  6. 6、成为VIP后,您将拥有八大权益,权益包括:VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
  7. 7、VIP文档为合作方或网友上传,每下载1次, 网站将根据用户上传文档的质量评分、类型等,对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档
查看更多
摘 摘 要 桥头跳车现象是公路中常见的病害之一,也是多年来困扰公路行业的一大难题。桥 头跳车是由桥台构造物与台背路基之间的不均匀沉降引起的,它的存在严重影响了行 车的舒适性,降低了车辆的行驶速度和道路的通行能力,加剧了车辆及桥台构造物的 损坏,甚至导致交通事故的发生。另外,对桥头路面大量的维修养护不仅花费了大量的 人力、物力和财力,而且也产生了不良的社会影响。 本文从台背过渡段路基产生沉陷的原因出发,通过建立三维空间模型,应用有限 元法对产生不均匀沉降的各种可能影响因素进行了计算分析。结果表明,台背路堤填 料压实不足以及路堤下地基承载力的不足是引起桥头跳车的主要原因:而严格控制台 背路堤填土的压实度和保证堤下地基具有一定的承载力是防止台背过渡段产生跳车病 害的有效措施。另外,结合工程实际,提出了台背过渡段纵向处理的长度范围及路堤 下地基的容许变形模量要求。最后,在此基础上针对目前常用的防治措施进行了技术 分析。 关键词 桥头跳车 有限元法 路桥过渡段 工后沉降 压实度 变形模量 防治措施 AbstractThe Abstract The phenomenon of vehicle bump at either end of a bridge is one of familiar highway distress and a difficult problem puzzling engineers for many years.It is caused by the differential settlement between bridge abutment and subgrade.As a result,it badly affects comfort of traveling,reduces velocity of steering,minishes capacity of highway,enhances the damage to vehides and bridge abutment,and even gives birth to traffic accident.In addition,SO much maintenance of surface at the end of bridge not only expends a great deal of labour power,material resources and money,but has bad influence to society. On the basis of reasons of subgrade settlement in transition zone at bridge head,the paper analyses all possible factors affecting differential settlement and computes by finite element method which establishes a three—dimensional space model.The computational results indicate that no enou曲compaction to fill materials and inadequate bearing capacity of foundation under subgrade are main reasons of vehicle bump at bridge head.Thus strictly controlling the degree of compaction of embankment and ensuring enough bearing capacity of foundation at bridge head are efficient measures preventing vehicle bump at the end of bridge.Furthermore,with the combination of engineering practice,the paper suggests two technical indexes:the length of transition zone adjoining the bridge abutment and the minimal permitting modulus of deformation of foundation under subgrade.In the end,the paper gives a technical analysis on usual

您可能关注的文档

文档评论(0)

peili2018 + 关注
实名认证
文档贡献者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档