离心式空气压缩机换热器换热效率的研究-机械设计及理论专业论文.docxVIP

武汉理t大学硕士学位论文ABSTRACT 武汉理t大学硕士学位论文 ABSTRACT Single．phase forced convective heat transfer inside tube is锄important research realm in the technology of heat transfer augmentation．It plays all important part in saving energy and decreasing the volume and weJight of heat exchanger．In OUr studies， internally finned tube that used in heat exchanger for centrifugal compressor can be used to enhance sinde．phase forced convective heat transfer inside tube．In USUai air- liquid tube heat exchangers，liquid walks in the tube and air walk out the tube。to improve the efficiency of the air’s side．the adoption adds the way of a tube of wings to increase the exchange area．]rbe shortage of this kind of exchanger is that thnn吐increase the exchange area of airs side，the air CUlTent veloeity still in lower level．so the one衔cient of transmit heat still very low，that cause energy of heat exchange still not high．Internally finned tube heat exchanger is a kind of new heat exchangers．It’s basic characteristics is exchange two kinds of material’s way．1et air walk inside．the watelwaiks outside．铀e purpose for internally finned tube is to increase exchangerts area．T1lis kind of heat exchangers have already confirmed to have higher efficiency，Call lower cooler’s physical volume in the compressor． Compares the internally finned tube with tradition tube exchanger，the result shows that heat transfer augments，volume decreases，metallic materiaI reduces and energY saves．So the internally finned tube exchanger have very wide cagineering application background．Few sty【dies have been carried out on the enhanced heat transfer mechanism of internally finned tube due to the complex and irregular external shape． The effects of various strncture parameters on heat transfer performance in the internally finned tube have not been studied systematically． This text used experiment research and numericai simulation to research the internally finned tube that used in heat exchanger for centrifugal compressor． The resu