桑车2000自动变速器ECU仿真测试台的研究-控制科学与工程专业论文.docxVIP

AbstractAbst Abstract Abst ract Automatic transmission(AT)is now the trend of the vehicle transmission，which greatly improves the vehicle’s economical and dynamic performances and greatly alleviates the drivers working intensity．Electronic control unit fEcu)is the core of AT system．This thesis concentrates on the signal denoising and detecting of ECU simulation test platform of Santana 2000 automatic transmission project between Tongji University and Shanghai Automobile Industry Fund．It provides theory guidance for the system design of ECU simulation test platform to simulate signal denoising and detecting based on wavelet analysis through MATLAB． The principle and stmcture of Santana 2000 ECU system are introduced firstly． This thesis emphasizes the developing and testing platforill of ECU system，namely ECU simulation test platform consisting of the analysis and conclusion of wavelet transform theory as well as signal denoisiug and detecting of the ECU simulation test plafform based on wavelet analysis．The difference iS made between wavelet analysis and traditional STFT(Short Time Fourier Transform)．The paper clarifies the advantage of wavelet transform in unstable signal analysis as well as introduces the principle of multi—resolution analysis and the arithmetic of MaUat．Research is made in the signal detecting technology based on wavelet analysis．Analysis is made in the inner relation between module max．of wavelet transform and oddity of signal．The dissertation detects and denoises the signal of ECU simulation test platform with Daubechies wavelet．The simulation result proves the feasibility and superiority of this method． Wavelet analysis has different frequency in different plane position．We can see the general picture and detail of the signal at the same time．In the simulation，the discontinuity is located accurately and clearly in the detailed part of the signal decomposition，The dissertation compares two signal—denoising methods．One is based on FFT and the ot