冷连轧厚度自动控制系统-冶金工程专业论文.docxVIP

Study Study on thickness automatic control system of tandem mill Specialty：Metallurgical Engineering Presented by：：Lv Junming Directed by：Hua Jianshe， Li xuexin Abstract The accuracy of sheet gauge is one of two major quality control guidelines．It is especially important to increase the sheet quality in the fierce competition of in and abroad market economy．The gauge control is one of the two key technologies jn the field of sheet rolling and it is developing fast with the development of electronics technology． This paper is the innovation of an imported used five-tandem mill．The main innovation work iS to innovate the SCrew．down type and the control of rolling．In the condition of non—manufacturing housing structure，the origihal electrical screw-down mechanism is replace by a long—stroke cylinder and the gauge automation control system is applied into rolling adjustment．The full—digital Dc drive system is applied in the control system．Hi曲一speed VME di百tal control system HIPAC is applied into the first—class automation control；the mathematical model is set up for the secondary rolling process． This paper describes the principle of sheet gauge，the main constitute of automation system including hardware and software structure，some main functions of first claSS automation system and the application of gauge control system in the cold mill． In the application of automation gauge control，in this paper some new achievements in the field of modem control theory,electronics and computer are applied．Meanwhile， folward—feedback AGC，feedback control AGC，tension control，tension feedback control and monitoring ATC systern are applied．The main character of mis coutrol iS to set the sheet gauge calculated by bounce formula as practice gauge which is compared with the setting gauge or lock gauge．1_lIe difference is the gauge difference value and is regulated by screw—down system．In such a wav．the character of this system is increased and avoids the influence of SUch factors as roll