课件：GBresAnalyzeVudae.pptVIP

It takes a lot of discrete data to see a small difference. Variable data is much more rich with data. Go to “STAT” command Go to “Basic Statistics” on pull down menu Go to “2 Proportions” and Click on “Summarized Data” For 1’st sample, enter 3000 in “Trials” and 129 in “Successes. For 2’nd sample enter 200 in “Trials”and 6 in “Successes”. Hit OK General discussion of power and sample size as well as signal to noise might be appropriate at this point depending on class. This is important for them to know. They can get assistance. Identify Sources of Variation After applying graphical analysis tools to the data set, the Project Team is ready to identify sources of variation in their process. The purpose of the Analyze Phase is to target root causes that Project Teams validate and to verify them with observation, data, or experiments. Process Analysis Methods Graphical Analysis Tools Attribute Data Pareto Variable Data Run Chart Boxplot Histogram Scatter Plot Identify Sources of Variation Review Analysis Methods Purpose of Identifying Sources of Variation This step continues the process of narrowing and focusing that began with project selection. The Project Team will use the results produced by graphical analysis to target specific sources of variation. Process Analysis Methods Graphical Analysis Tools Attribute Data Pareto Variable Data Run Chart Boxplot Histogram Scatter Plot Identify Sources of Variation Review Analysis Methods Verification Method There are many methods available to verify that likely causes are indeed root causes. For example, by collecting additional defect data (perhaps a small sample of defects) it can be determined whether, in fact, the root cause was the culprit. In some cases, this may be as easy as observation. Also, making the problem come and go is a critical aspect of verifying root cause. Process Analysis Methods Graphical Analysis Tools Attribute Data Pareto Variable Data Run