改铸件及机加量产工艺包含模拟幻灯片.pptx

Wescast Industries (China) Co., Ltd Wuhan / Hubei ;BOSCH MAHLE TH GM1.5L ? 2040-065-0322 machining/3040-070-0109_00_FS Casting 1040-065-0202 Assembly Material: 1.4837 ? ;Wescast Industries (China) Co., Ltd - Expertise;;1;1套热芯盒（1模3腔） 1 sets hot core box, 3 cavities/ box ;BMTS GM1.5L Z955 hot cores;10 cavities per mold;GM1.5L_Simulation_report;Simulation data Set up;Casting 3D;Hot Spot;Hot Spot Other direction Z and X ;Feedmod and Riser;Porosity by X-ray;Porosity by Cut;Summary;Simulation data Set up;Gating system;Porosity by X-ray;Porosity 12 by Cut;Porosity 3 by Cut;Summary;Simulation data Set up;Gating system;Hot Spot;Porosity by X-ray;Check Casting by Cut;EndThanks;Wescast Industries (China) Co., Ltd Wuhan / Hubei ;;Capacity Analysis – Machining--Local;BOSCH MAHLE TH GM1.35L Manufacturing Process ;BOSCH MAHLE TH GM1.35L Manufacturing Process ;OP10 to OP 40;Bosch Mahle TH GM1.5L Machining Process-steps to be done in between machining operations-; Machining ProcessOP 10/OP15;Machining ProcessOP 10;Machining ProcessOP 10 – Locator Points;Process: 3 steps/2 fixtures Locating datum: X, Y, Z;;Machining ProcessOP 20;Machining ProcessOP 20;Machining ProcessOP 20 – Locator Points;Process: 1 steps/1 fixture Locating datum: C, H;Machining ProcessOP 20 – Error proofing; Machining ProcessOP 30;Machining ProcessOP 30;Machining ProcessOP 30 – Locator Points;Process: 1 steps/1 fixture Locating datum: C, H;Machining ProcessOP 30 – Error proofing;Machining ProcessOP 40/45;Machining ProcessOP 40+45;Machining ProcessOP 40+45 – Locator Points;Process: 3 steps/2 fixtures Locating datum: A, B,C;Machining ProcessOP 40 +45– Error proofing;Manufacturing ProcessOP 50;Equipment: ATEQ F520 Parameter Pressure: 150kpa Fill Time: 10.0s Stab Time: 12.0s Test Time: 10.0s Measure Rang: 1-5000Pa/s BMTS Require: 100Pa/s;Manufacturing ProcessOP 60;Equipment: Dedicated Assembly Machine;Manufacturing ProcessOP 70;;Manufacturing ProcessOP 80;Equipment: Shanghai Chuanyixinnong