3MW风电机组D3000风电齿轮箱设计.docVIP

PAGE III 摘 要 在风力机的各个组成部分，变速箱是最高的故障率之一，也是我国风电设计水平的主要瓶颈。目前，国内风力机齿轮箱故障主要集中在齿轮箱的工作寿命不能达到设计要求。齿轮失效是齿轮箱失效的主要原因。因此，高效、可靠的齿轮传动系统的设计是我国风电产业发展的关键。 本文通过对风机驱动系统的分析和研究，根据目前国内外研究现状，对风力发电机组的核心部件进行了研究。本文提出了一种新型的风力发电机齿轮箱，由两个阶段的行星齿轮传动机构和一个平行轴齿轮组成。在确定传输方案后，对加速器的关键部件进行了分析，并对整个系统进行了动力学分析。本文设计的风力发电机组具有输出功率大、体积小、可靠性高的特性，可为我国风力发电机组自主知识产权的发展提供一定的依据。 关键词：风力发电，增速器，动力学分析 PAGE II Abstract In the various components of the wind turbine, the gearbox is one of the highest failure rate, and it is also the main bottleneck of the design level of wind power in China. At present, the domestic wind turbine gear box failure is mainly concentrated in the gear box working life can not reach the design requirements. The failure of gear is the main cause of the failure of the gear box. Therefore, the design of efficient and reliable gear transmission system is the key to the development of wind power industry in China. In this paper, through the analysis and research of the wind turbine drive system, according to the current research situation at home and abroad, the core components of wind turbine. This paper presents a new type of wind turbine gear box, composed of two stage planetary gear train and a parallel shaft gear. After the transmission scheme is determined, the analysis of key components of the accelerator and the dynamic analysis of the whole system are carried out. In this paper, the design of wind turbine generator with high output power, small size, high reliability, can provide some basis for the development of Chinas wind turbine independent intellectual property rights. Key Words：Wind power generation, speed increasing device, dynamic analysis PAGE 12 目 录 TOC \o 1-3 \h \z \u 摘 要 I Abstract II 目 录 III 第1章 绪论 1 1.1 选题的背景、目的和意义 1 1.2 国内外现状及发展 2 1.2.1 国外研究现状与发展 2 1.2.2 国内研究现状与发展 3 1.3 研究目的与内容 4 1.3.1 研究目的 4 1.3.2 研究内容 4 第2章 3MW风力发电机组齿轮箱设计 5 2.1传动方案确定 5 2.1.1 增速箱设计要求及步骤 6 2.1.2 传动方案及运动原理图 7 2.2增速器总体设计 8 2.2.1 第一级行星轮系传动设计 8