电容式水膜厚度测量传感器的设计与专实现-控制工程专业毕业论文.pdf.docxVIP

山东建筑大学硕士学位论文The 山东建筑大学硕士学位论文 The design and im plem entation of the capacitive sensor for thickness measurement of water film Li Bin(Control Engineering) Directed by Li Hong Min ABSTRACT Water film thickness is the key performance index to evaluate the heat exchanged capacity of falling—film evaporation and the surface form of the water film fluctuation state． With the deepening of tile research the falling-film evaporation heat transfer theory,tile vcater film thickness usually reaches micrometer．Thus，the detection ofwater film thickness must be very high accuracy and dynamic frequency response to meet the requirements of water film measuring．Therefore，it is necessary to develop to realize the high precision measurement ofwater film thickness． By comparing several different measuring method of water film thickness，this research builds capacitance WOI‘king model，which is based electrostatic field theory．The research developed capacitive for thickness measurement of water film，this capacitive is composite structure，outside the surface increases with layer of dielectl‘ic coating of PTFE．In order to prevent water mist spraying effect the measurement accuracy，the coating isolated the surface of water film from the probe， The converts the change of the water film thickness into capacitance value，this research designed non--electricity conversion circuit；and capacitance signal is convened to voltage signal for acquisition and display；the hal‘dware circuit realized the high precision detection of capacitance signal of PF seale．Under the LabVIEW software environment，the research developed PC platforna for thickness measurement of water film and display． Using A／D acquisition card high--speed collect output voltage signal of non‘‘electricity conversion circuit and uploaded tO the PC．The LabVIEW software processing ltage signal， converted to the corresponding water film thickness values．What’S more，we developed transplantable application program，which is convenient for Oil-