广东地税VPLEX特性演示.pptx

广东地税VPLEX Metro高可用特性演示 议程 VPLEX基础 VPLEX Metro 同步复制 VPLEX Mobility 在线迁移 VPLEX Metro Mobility介绍 Use VPLEX to move data between data centers, relocate a data center or consolidate data, without disrupting host application access to the data. VPLEX Metro Mobility优势 The source and target arrays can be in the same data center (VPLEX Local) or in different data centers separated by up to 5ms (VPLEX Metro). With VPLEX, source and target arrays can be heterogeneous. When you use VPLEX to move data, the data retains its original VPLEX volume identifier during and after the mobility operation. No change in volume identifiers eliminates application cut over. The application continues to use the “same” storage, unaware that it has moved. VPLEX Metro Mobility迁移方式 All components of the system (virtual machine, software, volumes) must be available and in a running state. VPLEX Metro Mobility在线迁移过程 Mobility moves data from a source extent or device to a target extent or device. When a mobility job is started, VPLEX creates a temporary RAID 1 device above each source device or extent that is to be migrated. The data mobility operation is non-disruptive. Applications using the data continue to write to the volumes during the mobility operation. New I/Os are written to both legs of the device. 1. The target extent/device must be the same size or larger than the source extent device. 2. The target device cannot be in use (no virtual volumes created on it). 3. The target extent cannot be in use (no devices created on it). 在线迁移速度可调节 广东地税VPLEX Metro信息 南海VPLEX01 NHVPLEX01 IP:150.18.15.125 NM:255.255.255.0 GW:150.18.15.254 天河VPLEX02 GDVPLEX02 IP:150.17.15.125 NM:255.255.255.0 GW:150.17.15.254 网络配置 南海VPLEX01 双引擎 固件版本：升级到5.5.1.02.00.01 序列号：CKM00162601045 天河VPLEX02 双引擎 固件版本：升级到5.5.1.02.00.01 序列号：CKM00162601063 VPLEX硬件配置 广东地税VPLEX Metro拓扑 WAN NHVPLEX01 THVPLEX02 DMX NETAPP NETAPP AIX Host 1 AIX Host n