- 1、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。。
- 2、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
- 4、该文档为VIP文档,如果想要下载,成为VIP会员后,下载免费。
- 5、成为VIP后,下载本文档将扣除1次下载权益。下载后,不支持退款、换文档。如有疑问请联系我们。
- 6、成为VIP后,您将拥有八大权益,权益包括:VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
- 7、VIP文档为合作方或网友上传,每下载1次, 网站将根据用户上传文档的质量评分、类型等,对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档
查看更多
翻译样稿(Translation Sample)
北京华译网翻译公司(Beijing HuayiNet Translation Company)
2 制动性能试验 Braking Performance Test
2.1 制动性能静态试验
Static Test of Braking Performance
2.1.1 试验目的 Test aim
验证动车组的静态制动性能是否满足试验大纲要求。
Verify if the static braking performance of the MU satisfies the requirements of the test
outline.
(空车状态下的制动性能静态试验已由BST 公司申请试验免除)。
(BST company has applied for the exemption of braking performance static test under empty
state).
2.1.2 试验依据 Test reference
1.4 通用标准及依据。 General standards and references.
2.1.3 试验条件 Test condition
试验对象:CRH1-062E 动车组,置额定载荷工况(AW2 )。
Testing object: CRH1-062E MU, with rated load condition (AW2).
试验日期:静态制动试验于2009 年9 月10 日进行,天气多云。
Testing date: the static braking test was conducted on September 10, 2009, with cloudy
weather.
试验地点:青岛BST 公司试验车间。
Testing place: testing workshop of Qingdao BST company.
试验前空压机工作正常,干燥器工作状态正常。
The air compressor should work normally and the working state of dryer should be normal
before the test.
制动控制单元工作状态正常,试验过程中不得更换制动软件版本。
The working state of braking control unit should be normal. The edition of braking software
can not be replaced during the testing process.
2.1.4 试验方法Test method
分别在 CRH1-E 动车组的 1 车(Mc1 )、2 车(Tp1 )、3 车(M1 )、4 车(M2 )、5
翻译样稿(Translation Sample)
北京华译网翻译公司(Beijing HuayiNet Translation Company)
翻译样稿(Translation Sample)
北京华译网翻译公司(Beijing HuayiNet Translation Company)
车(Tp2 )、9 车(Mdi )、10 车(T2 )、11 车(M4 )的空簧测点和制动缸测点处安装
空气压力传感器。
Install air pressure sensors at the air spring measuring points and braking cylinder measuring
points of car 1 (Mc1), car 2 (Tp1), car 3 (M1), car 4 (M2), car 5 (Tp2), car 9 (Mdi), car 10
(T2) and car 11 (M4) of CRH1-E MU, separately
文档评论(0)