毕业设计（论文）-汽车油泵上盖复合模设计.doc

PAGE I 摘 要 本次是汽车油泵上盖制件的设计，分析制件的材质问题、大致结构和尺寸的标注精度。制件设计使用的材质是10钢。汽车油泵上盖的外形属于完成对称，制件的料厚为1.5mm, 汽车油泵上盖为落料拉深冲孔件，拉深为一次拉深成形。所以汽车油泵上盖可以采用常用的复合冲裁模和多个单工序模来完成生产。 在进行设计之前需要对汽车油泵上盖进行分析，分析可以知道汽车油泵上盖为比较规则落料拉深冲孔件。还要对材料进行分析，分析材料的精度是否能够使用生产工艺进行生产。然后分析模具的结构问题，由于工件只有落料拉深冲孔的工序，可以采用单工序模或者复合模来完成生产。两种方案总要分析采用哪一种比较好，哪一种最适合生产，经过一系列的比对之后确定采用多个模具来完成制作，采用一个模具的话会比较紧凑，不容易实现生产，而且精度也不容西保证。所以要想生产就要采用多副模具。 经过对汽车油泵上盖复合模设计，不但能熟练的对设计和理论知识进行掌握，还能提高利用各种资源的学习能力。阐述了模具的设计过程和证明汽车油泵上盖在实际设计制造中的使用的可能性。 关键词：拉深，外形对称，模具设计 全套图纸加扣?3012250582 Abstract This is the design of the end cover parts, analyzing the material quality, the general structure and the dimensioning accuracy of the parts. The material used in the design of parts is 10 steel. The shape of the end cover is complete symmetry, the thickness of the piece is 1.5mm, the end cover is the blanking and drawing hole trimming, and the number of punching needs to be completed by two punching dies. Therefore, the end cover can be produced by using the common compound blanking die and multiple single working modes. Before designing, the end cover needs to be analyzed and analyzed. We can know that the end cover is a regular blanking and deep drawing trimming punching piece. It is necessary to analyze the material and analyze whether the accuracy of the material can be produced by the production process. Then the structure problem of the die is analyzed. Since the workpiece is blanking, deep drawing, punching and punching, it can be completed by single working die or compound die. The two schemes always want to analyze which one is better, which is the most suitable for production. After a series of comparisons, it is determined to use multiple moulds to complete the production, because the number of deep drawing is much more, the use of a mold will be more compact, not easy to achieve production, and the accuracy is not guaranteed. So if you want to produce, you have to adopt a multi - mold. Through the design of the end cover compound mold, we can not only mast