ASME B18.16.6-2008 尼龙嵌入防松螺母(英寸系列).pdf

ASME B18.16.6-2008 Nylon Insert Locknuts (Inch Series) A N A M E R I C A N N A T I O N A L S T A N D A R D ASME B18.16.6-2008 Nylon Insert Locknuts (Inch Series) A N A M E R I C A N N A T I O N A L S T A N D A R D The Standard is downloaded from Standard Sharing Date of Issuance: November 24, 2008 This Standard will be revised when the Society approves the issuance of a new edition. There will be no addenda issued to this edition. ASME issues written replies to inquiries concerning interpretations of technical aspects of this Standard. Periodically certain actions of the ASME B18 Committee may be published as Cases. Cases and interpretations are published on the ASME Web site under the Committee Pages at as they are issued. ASME is the registered trademark of The American Society of Mechanical Engineers. This code or standard was developed under procedures accredited as meeting the criteria for American National Standards. The Standards Committee that approved the code or standard was balanced to assure that individuals from competent and concerned interests have had an opportunity to participate. The proposed code or standard was made available for public review and comment that provides an opportunity for additional public input from industry, academia, regulatory agencies, and the public-at-large. ASME does not “approve,” “rate,” or “endorse” any item, construction, proprietary device, or activity. ASME does not take any position with respect to the validity of any patent rights asserted in connection with any items mentioned in this document, and does not undertake to insure anyone utilizing a standard against liability for infringement o