机械工程及自动化专业毕业论文--水杯盖注塑模模具设计说明书.doc

机械工程及自动化专业毕业论文--水杯盖注塑模模具设计说明书 摘 要 此次的设计任务即水杯盖注射模具设计零件模型就是商场里面买来的大口杯 产品的 3D建模借助 PROENGINEER设计软件创建型腔活块以及其他零件并自动生成所需要的零件工程图 使用草图和厚度检测评估零件直接参照产品三维模型创建分模曲面及滑块再生成模具型腔组件动模定模对于模架的设计利用 PROE模座专家EMX41来完成从标准模架选择到产品输出全部采用 3D化设计我在水杯盖模具设计过程中从零件建模到型腔型芯的设计模架设计直至最后的模具开模动作模拟都充分发挥了 PROENGINEER设计软件的各个模块和插件的优势基本做到了无图纸化设计采用一模四腔的设计注塑机综合注塑容量锁模力最大注塑面积和模内压力等技术参数确定注塑机型号 模具的特点是滑块在动模斜导柱在定模以保证顺利完成侧向抽芯 关键词模具注塑件PROEEMX生产实践 ABSTRACT This task is the design of cupcovers injection mold design Parts model is the common one in super market Products of 3 D modeling with the aid of the PROe design software to create cavity live piece and other parts and the engineering drawings is automatic generated the parts is evaluated by sketches and the thickness detect Referring to the product directly 3 d model parting surface the slider the mold cavity components mold core and the mold cavity are created From standard formwork choose to product output 3D design is used such as using PROE mould seat experts EMX41 to complete for the design of the formwork From parts modeling to cavity cores of design formwork design until the last of the mould cavity movement simulation are taken full of the PROe design software modules and plug-in advantage Using a module and four cavity designs Battlefield BC_T_1500630 is choosed as injection machine Comprehensive injection capacity injection molding machine clamping force and imum injection area and mould pressure technology parameters Futaba is choosed as Mold base other standard parts are selected Misumi Using the die design software-PROe from the initial part 3D modeling to the end of the mould parts of the assembly parts mould seat design engineering drawings files are all relied on PROe modules to get with the engineering drawings that meet the graduation project standard The characteristics of the mould is that the slider in dynamic model oblique guide column in the mold to ensure smooth finish side core-pulling In addition the necessary