毕业设计（论文）-基于GUI的模拟通信系统仿真.doc

大庆石油学院本科生毕业设计（论文） PAGE 摘 要 在通信系统的设计实验过程中，通信信号仿真具有灵活性好经济等诸多优点，为通信系统研究工作带来了极大的方便，GUI（Graphical User Interface）的广泛应用是当今计算机发展的重大成就之一，极大地方便了非专业用户的使用。本设计任务是对模拟通信系统包括幅度调制(AM)方法(DSB-AM，SSB-AM和常规AM)和角调制方法(频率和相位调制)通过GUI编程仿真来实现。本设计可以实现各个信号的时域和频域的图形的绘制，通过GUI编程仿真来实现对信号的建模计算，得到了时域波形和频谱，能够直观的显示各种调制样式的模拟通信系统。本文设计的系统具有设计界面简洁方便，操作简单，系统运行稳定的特点。 关键词：模拟通信系统；幅度调制；角调制；MATLAB；GUI 全套设计加扣?3012250582 Abstract In the design of communication systems in the experimental process,the communication signal simulation has the flexibility and many other economic advantages,it has brought great convenience to the research work for the communications system. GUI (Graphical User Interface) widely used in the development of todays computers is one of the major achievements,it greatly facilitated the use of non-professional users. The design of analog communication systems,including amplitude modulation (AM) method (DSB-AM, SSB-AM and conventional AM) and angle modulation methods (frequency and phase modulation) use GUI programming through simulation to achieve. The design can be achieved the graphics of various signals in time domain and frequency domain,using GUI programming through simulation to achieve the modeling of the signal calculated Received time-domain waveform and spectrum, can show a variety of intuitive style analog modulation communication systems. In this paper, the design of the system has the characteristics of simple and convenient interface design , simple operation,stable system operation. Key words：Analog communication systems; Amplitude modulation; angle modulation；MATLAB;GUI PAGE 41 目 录 TOC \o 1-2 \h \u 第1章 概述 1 1.1 课题研究的背景 1 1.2 通信系统仿真的研究现状 2 1.3 设计研究的主要内容 2 1.4 本章小结 3 第2章 模拟信号的调制和解调 4 2.1模拟通信系统概述 4 2.2 幅度调制 5 2.3 幅度解调 9 2.4 角调制 11 2.5 角调制的解调 13 2.6 本章小结 19 第3章 MATLAB GUI的相关知识简介 20 3.1 MATLAB概述 20 3.2 基于GUI的程序设计 22 3.3 本章小结 23 第4章 基于GUI的模拟通信系统仿真设计 24 4.1