热处理对消除水曲柳木材弯曲变形的影响.pdfVIP

283 ( ) ol. 28,No.3 2004 5 Journal of Nanjing Forestry University(Natural Sciences Edition) May, 2004 1 2 2 李大纲 ,李 坚 , 刘一星 ( 1. 南京林业大学, 江苏 南京 210037;2.东北林业大学, 黑龙江 哈尔滨 150040) : 弯曲木制品的形状和尺寸稳定性直接 响弯曲木的应用前景和产品质量, 为了保证弯曲制品的产品 质量,笔者对弯曲木尺寸形状稳定性进行了研究提出了弯曲木制品尺寸稳定性的相关理论以及如何提高弯 曲木尺寸稳定性的方法对弯曲木制品进行了不同温度处理下的曲率半径回复试验, 比较了木材经 100, 140, 160, 180 和200 5 种不同温度下分别处理 2,4,8 h 后, 再经24 水浸泡24 h,60 水浸泡4 h, 100 沸水煮1h 后的曲率半径回复率结果表明: 弯曲木的曲率半径回复率随热处理时间的增加而减小, 随处理 温度的提高而减小 : 水曲柳; 弯曲木; 热处理; 回复率 :TS652 :A : 1000- 2006( 2004)03- 0023- 04 Effects of Heat Treatment on Permanent Fixation Bending Deformation in Wood of Fraxinus mandshurica 1 2 2 LI Dagang ,LI Jian ,LIU Yixing (1. Nanjing Forestry University, Nanjing 210037,China; 2. Northeast Forestry University, Ha erbing 150040, China) Abstract: Because the shape and dimensional stability of bent wood products will affect applied prospect and product quality of bent wood,shape and dimensional stability was studied to ensure product quality of bent wood.A curvature reversion test of bent wood products was done at differ ent temperatureprocess.It was compared curvaturereversion ratio that the wood was processed at temperature of 100, 140, 160, 180 and 200 for 2,4, and 8 hours,then for another process soak ing for 24 hours at 20 ,soaking for 4 hours at 60 ,and soaking at 100 boiling water for 1 hour.The results show that the set recovery of radius of curvature increases as the heat treatment timesdecreases,and decreases as the heat treatment temperature increases. It