各种接逢对比.ppt

2006 ISSA World Congress September 6 – 8, 2006 Beijing International Convention CenterBeijing, China 2006 ISSA 全球大会2006年9月6日-8日北京国际会议中心中国，北京 Micro-Surfacing (Quality Control)微 表 处（质量控制） A Guide To Quality Construction 施工质量指南 BY Alan Berger Valley Slurry Seal Company West Sacramento, CA. - USA Four Lane Interstate州际四车道公路 Two Lane Highways双车道公路 Residential Inter City城市内的住宅区 Airports机 场 Truck Mounted Machine安装在卡车上的设备 Continuous Run连续式操作 Flushing Wet象被冲洗变湿的路面 Debonding剥离 Drag Marks拖痕 Cold Mix Drag Marks冷拌合拖痕 Squeegee橡胶刮板 Bad Squeegee Work劣质的刮板修补 Dirty Strike Off脏的刮板 Dirty Strike Off Drags脏刮板拖痕 Removing Drag Marks除去拖痕 Changing Texture改变纹理 Cutting Straight Edge切直路边 Good Joint优质接缝 Unacceptable Joint不能接受的接缝 Unacceptable Wet Joint不被接受的湿接缝 Good Longitudinal Joint优质的纵向接缝 Feathering Center Joint平整中心接缝 Excessive Overlapped Center Joint过度重叠的中心接缝 Missed Center Joint遗漏的中心接缝 Good Acceptable Edge Lines优质的可被接受的路沿 Unacceptable Longitudinal Edge Line不合格的路沿 Bad Edge Line - City String Line细绳 Rut Work车辙 5’ Rut Box (Twice)5英尺车辙摊铺盒 Bad Rut Work劣等的车辙填补 Bad Rut Work劣等车辙修补 Correct Patching Method纠正修补方法 Unacceptable Patch不能接受的坑补（1） High Traffic交通繁忙地带 Dusting Intersection十字路口的应急处理 Successful Construction 成功的工程Hwy 121, Napa, CA Questions? Learn from the mistakes of others -- you won’t live long enough to make them all yourself. . . Good clean joint This is an example of how your transverse joints should look. They should be straight and butted together, rather than overlapped. And they shouldnt have drags and streaks taking off from the joint. 优质清洁接缝 这是一个理想的横向接缝。它们应该是笔直对接在一起的，没有重叠。从接缝处不应该有拖痕或条纹。 Unacceptable transverse joint This is an example of a transverse joint that was built as an overlap joint. Notice the gap under the straight edge on the joint, which shows an elevation difference. This gap will cause a bump to be felt when traveling over the joint. Also the discolored material that is evident here is cold material that was picked up