STC12C5A60S2串口2测试程序.docVIP

/* --- STC MCU International Limited ---------------------------------------*/ /* --- 演示STC 1T 系列单片机串行口2功能 (8-bit/9-bit) ----------------*/ /* --- Mobile: (86-----------------------------------------------*/ /* --- Fax: 86-755---------------------------------------------------*/ /* --- Tel: 86-755----------------------------------------------------*/ /* --- Web: www.STCMCU.com -----------------------------------------------*/ /* 如果要在程序中使用或在文章中引用该程序， -------------------- ---*/ /* 请在程序中或文章中注明使用了宏晶科技的资料及程序 -----------*/ /*-------------------------------------------------------------------------------------*/ #include reg51.h #include intrins.h typedef unsigned char BYTE; typedef unsigned int WORD; #define FOSC //System frequency #define BAUD 115200 //UART baudrate /*Define UART parity mode*/ #define NONE_PARITY 0 //None parity #define ODD_PARITY 1 //Odd parity #define EVEN_PARITY 2 //Even parity #define MARK_PARITY 3 //Mark parity #define SPACE_PARITY 4 //Space parity #define PARITYBIT EVEN_PARITY //Testing even parity /*Declare SFR associated with the UART2 */ sfr AUXR = 0x8e; //Auxiliary register sfr S2CON = 0x9a; //UART2 control register sfr S2BUF = 0x9b; //UART2 data buffer sfr BRT = 0x9c; //Baudrate generator sfr IE2 = 0xaf; //Interrupt control 2 #define S2RI 0x01 //S2CON.0 #define S2TI 0x02 //S2CON.1 #define S2RB8 0x04 //S2CON.2 #define S2TB8 0x08 //S2CON.3 bit busy; void SendData(BYTE dat); void SendString(char *s); void main() { #if (PARITYBIT == NONE_PARITY) S2CON = 0x50; //8-bit variable UART #elif (PARITYBIT == ODD_PARITY) || (PARITYBIT == EVEN_PARITY) || (PARITYBIT == MARK_PARITY) S2CON = 0xda; //9-bit variable UART, parity bit initial to 1 #elif (PARITYBIT == SPACE_PARITY) S2CON = 0xd5; //9-bit variable UART, parity bit initial to 0 #endif BRT = -(FOSC/32/BAUD); //Set auto-reload vaule of baudrate generator AUXR = 0x14; //Baudrate generator work in 1T mode IE2 = 0x01; //Enable UART2 interrupt EA = 1; //Open maste