SRX防火墙简单配置命令.docVIP

目 录 TOC \o 1-3 \h \z \u 1 基本操作 1 1.1 恢复出厂配置 1 1.2 删除SRX默认配置 2 1.3 保存冗余配置 2 1.4 服务 2 1.5 设置设备名 2 1.5 配置本地超级用户 2 1.6 配置时间 2 1.7 设备重启/关闭 3 1.8 安全域zone配置 3 1.9 分配接口到相应安全域zone 3 1.10 允许trust zone接受telnet/ssh管理流量 3 1.11 允许trust zone接受ospf/bgp路由信令 3 1.12 定义Screen的ips-options模板test 3 1.13 在zone上引用Screen的ips-options模板test 3 2 地址映射 4 2.1 NAT 4 2.2 VIP 4 2.3 MIP 4 3 Troubleshooting 5 3.1 抓包 5 3.2 端口镜像 5 基本操作 恢复出厂配置 load factory-default set system root-authentication plain-text-password commit request system reboot 删除SRX默认配置 root# delete This will delete the entire configuration Delete everything under this level? [yes,no] (no) y 保存冗余配置 request system configuration rescue save 服务 set system services telnet set system services web-management http set system services web-management session session-limit 3 /*/限制同时HTTP方式登录同时会话数为3 设置设备名 set system host-name SRX6500 配置本地超级用户 set system login user lab class super-user set system login user lab authentication plain-text-password 配置时间 set system time-zone Asia/Chongqing run set date 201103141721.00 /*/设置设备时间为2011-03-14 17点21分 00秒 set system ntp boot-server 91 set system ntp server 91 prefer /*/设置NTP服务，指定服务器IP为91 设备重启/关闭 request system reboot request system power-off 安全域zone配置 set security zones security-zone trust set security zones security-zone untrust 分配接口到相应安全域zone set security zones security-zone trust interfaces ge-0/0/0.0 set security zones security-zone untrust interfaces ge-0/0/1.0 允许trust zone接受telnet/ssh管理流量 set security zones security-zone trust host-inbound-traffic system-services ssh set security zones security-zone trust host-inbound-traffic system-services telnet 允许trust zone接受ospf/bgp路由信令 set security zones security-zone trust host-inbound-traffic protocols ospf set security zones security-zone trust host-inbound-traffic protocols bgp 定义Screen的ips-options模板test set security screen ids-option