承建单位项目法人单位上海应用物理所概况.pptVIP

Thank you for your attention * * * * * * * Hongtao Hou, TTC workshop, RIKEN, Japan, June 2018 Design of a superconducting third harmonic cavity for SSRF Hongtao HOU On behalf of RF group 2018-06-28 Contents Background Design Specification Harmonic Cryomodule Design Summary 1. Background: Motivation SSRF beamline phase-II project Installation of more insertion devices will decrease the beam lifetime Function Lifetime increase Beam performance improvement Instabilities suppression Advantages Provide Landau damping of synchrotron oscillations: suppress coupled-bunch and microwave instabilities Increase threshold of single bunch instabilities Harmonic cavities for bunch lengthening Resonant at fharm=n fRF (often n=3) Passive / active: no external power source required for passive system NC / SC: SC has sufficient impedance even at low current SSRF operation status (~ 2017) Scheduled / hrs Accomplished / hrs Availability MTBF MDT 2009 2215 2094 94.6% 28.3 1.65 2010 4003 3829.1 95.3% 40.44 1.84 2011 4477 4370 97.6% 55.3 1.57 2012 4610 4535.4 98.4 69.8 1.19 2013 4727 4638.7 98.1% 70.3 1.36 2014 4692 4624.5 98.6% 81.1 1.2 2015 4634 4556 98.3% 79.9 1.54 2016 4606 4530 97% 45.76 1.45 2017 4246 4152 97.8% 54.6 1.25 260 mA top-up operation SLS: passive Emax = 2.4 GeV Ibeam = 400 mA 1 Nb/Cu HC’s fharm= 3 fRF 3 times length 2.2 times lifetime Elettra: passive Emax = 2.0 GeV Ibeam = 320 mA 1 Nb/Cu HC’s fharm= 3 fRF 3 times length 3.5 times lifetime APS-U: passive + FPC Emax = 6.0 GeV Ibeam = 200 mA 1 Nb cavity fharm= 4 fRF 3 times length 3.5 times lifetime NSLS-II: passive, Emax = 3.0 GeV Ibeam = 500 mA 2-cell Nb cavity fharm= 3 fRF ~2 times lifetime Worldwide SC harmonic cavities In operation Under development Contents Background Design Specification Harmonic Cryomodule Design Control and interlock Summary 2. Design Specification Goal: Lifetime increase factor≥2，bunch lengthening fact