不同粉碎方式对硅灰石长径比影响的研究_庞功周.pdfVIP

2014年第1期 　 中国非金属矿工业导刊 总第108期 【试验研究】 不同粉碎方式对硅灰石长径比影响的研究 1 2 庞功周 ，王泽红 （1.苏州中材非金属矿工业设计研究院有限公司，江苏 苏州　215004； 2.东北大学资源与土木工程学院，辽宁 沈阳　110819 ） 【摘　要】具有高长径比的超细硅灰石针状粉在工业上有着极高的应用价值，提高硅灰石产品的长径比，关键在于粉碎 过程中采用适宜的粉碎方式保持矿物原有的结晶结构。本文研究了球磨机、搅拌磨、振动磨和气流磨在最优条件下对硅灰石 产品长径比的影响。研究表明：粉碎过程中施加于硅灰石颗粒上的作用力为剪切力时，才能得到理想的高长径比硅灰石；采 用QLM-1型流化床式气流磨，在气流粉碎压力0.4MPa、分级机转速8 000r/min的条件下，制备出了平均长径比为20.2的 硅灰石粉体。 【关键词】硅灰石；高长径比；粉碎方式；流化床式气流磨 【中图分类号】P619.29 ；TD985　　　 【文献标识码】A　　　 【文章编号】1007-9386(2014)01-0020-03 Effect of Different Comminution Methods on the Aspect Ratio of Wollastonite 1 2 PANG Gong-zhou , WANG Ze-hong (1. Suzhou SINOMA Design and Research Institute of Non-metallic Minerals Industry Co., Ltd., Suzhou 215004, China; 2. College of Resources Civil Engineering, Northeastern University, Shenyang 110819, China) Abstract: Needle-like wollastonite powder with high aspect ratio for industrial application has great use value. The key of increasing its length-diameter ratio is to retain the primary crystal structure during the milling process. In this study, under the optimal conditions, effects of different mills, such as ball mill, stirring mill, vibration mill and jet mill, on the aspect ratio of wollastonite grinding product were researched. The results showed that it was necessary for producing perfect high aspect ratio wollastonite product to apply shear force on the wollastonite particles during the process comminution. Using QLM-1 fluidized bed jet mill, the wollatonite powder which aspect ratio was 20.2 c