2.4GHz 双菱阵列天线.pdfVIP

【安逸8】wifi无线技术交流群273716586 2.4GHz quad double quad 2.4GHz A simple quad double quad design that gives low SWR and high gain. Written by: G4RFR ( FRARS ) Wednesday, 7 August 2002 G4RFR ( FRARS ) 2002 8 7 The G6NLC duad double quad antenna was inspired by designs for the 23cm and 13cm Amateur TV allocations. This design has been scaled, built, and then analysed with a network analyser to ensure the performance is optimum. The design is basically 4 double quad antennas phased together such that the signal from each antenna is added. The overall gain of this antenna is approaching 16dB, just under four times that of a single double quad. G6NLC 1 March2010 【安逸8】wifi无线技术交流群273716586 To construct this antenna, start with a piece of double sided PCB 260mm by 230mm. Mark the center points in both the horizontal and verticle planes. Using the two diagrams, mark and drill the holes that will have the UT141 coax pushed through for connection to the double quad elements. In this design, I left 10mm of coax on the back of the antenna to provide adjustment if required. On the front of the antenna, the double quad elements are spaced 14mm from the ground plane, and they are made from copper wire 1.8mm thick. When soldering the double quad elements in position, ensure they are all facing the same way. i.e. ground connection on the left, inner connection on the right. This will eliminate any phasing problems.