UPVC管道施工技术.docxVIP

Construetion Techniques for UPVC Pipes UPVC管道施工技术 Features of UPVC Pipes UPVC管道特性 UPVC pipes will be applied in most of the pips within this project, whose features are as follows: 一、本项目大部分管道采用UPVC材质，其应用特性表现在以下几个方面： High resistance to corrosions: UPVC is of splendid resistance to inorganic acid, alkali, salt under normal density and temperature, and could satisfy the requirement from common process equipment in coping with chemicals and water. 耐化性佳：UPVC对一般浓度及温度下的无机酸、碱、盐有着良好的阻抗性，可 满足一般工艺设备的对化学品及水处理的需求。 Strong structure: Under room temperature, the mechanical strength of UPVC to a great extent exceeds those of PP, PB, PE, ABS and etc. and is the best choice for displacing traditional metal pipes. 结构性强：在室温状态下，UPVC的机械性强度大幅度超过PP、PB、PE、 ABS等材质，是取代传统金属管的第一选择。 ? Good insulation properties: The coefficient of thermal expansion of UPVC is around 1/300, which is smaller than PP, PB, PE, ABS and etc. mat erials, thus increasing util iza tion efficiency and also saving some related insulation costs. 保温性佳：UPVC热传导系数约为镀锌钢管的1/300,亦远低于PP、PB、PE、ABS 等材质，应用时可提高能源使用效率，及节省相关保温费用。 ? Suff icien t flexibil ity: UPVC can not easily be damaged by foreign force or vibrations, like earthquake and machine vibrations etc. 柔韧性够:较不易被外力或振动造成的额外应力所破坏，如地震及机台振动等。 Smooth internal wall: can decrease friction loss and chance of buffer effects of the deposits in wall, which maintain system operational efficiency effectively. 内壁光滑：减少压力摩擦损失，降低内壁附着物影响流量机会，有效维持系统 操作效率。 Long time service years: UPVC piping systems can sustain pressures for 30 years by estimate. 使用期长：UPVC管路系统可预期维持压力承载长达30年。 Installations of UPVC piping systems 二、UPVC管路系统施工安装 Cut: straight pipes can be easily cut with wheel-shaped plastic pipe cutters, electric motor saws or special saws for plastic pipes. Keep cutting section smooth and perpendicular to axis of the pipes, and this can guarantee the largest bonding area （ strength）. 切割：直管可以用轮形塑胶管切割器、电锯或齿轮完好的塑料管专用锯子等简 单工具轻松切割，在切割时尽量确保切割面平整且与管轴呈垂直，才可以获得 最在????黏合面积（强度）。 Burr removal: Clean clear of t