校园代步工具设计.docVIP

PAGE PAGE 15 攀枝花学院本科毕业设计（论文） 校园代步工具设计 学生姓名： 王 磊 学生学号： 200310622002 院（系）： 机电工程学院 年级专业： 03级工业设计 指导教师： 蒋成荣 副教授 助理指导教师：简红吉 助教 二〇〇七年六月 攀枝花学院本科毕业设计（论文） 摘 要 = 1 \* ROMAN I 摘 要 当前大多数大学的校园交通问题日益严重，急需解决。随着高校近几年校园面积的不断扩张，学生需要花费很多时间和精力在校内外交通之上，又由于不断的扩招使得校内自行车的数量猛增，交通安全、堵塞、停放等问题也越来越突出。因此，设计出一种能够了解决这些问题的校园代步工具具有重大的现实意义。 本课题在对当前我国高校的校园交通状况进行分析研究的基础上，依照产品的开发设计流程，运用设计方法构思、选择方案；人机分析确定尺寸；色彩分析确定色彩；机械性能分析确定材料，再采用Pro/E和3d max等设计软件得出设计方案的最终效果图和工程图，并制作实物模型检验设计方案，得到了一款适应当前高校校园交通状况的代步工具。 关键词 校园交通，代步工具，人机分析， 攀枝花学院本科毕业设计（论文） ABSTRACT = 2 \* ROMAN II ABSTRACT At present the majority of the campus traffic problems are worsening day by day, it is need urgently to solve. With the expansion of the campus continuous in recent years, students need to spend a lot of time and energy on the campus traffic. In addition, the number of bicycles is increasing due to the increasing number of students, traffic safety, congestion, parking and other problems are more and more serious. Therefore, it is of great realistic significance to the problems of campus travel that design a campus tool instead of walking. This paper bases on investigate and analyzing to the current campus traffic. Then, according to the procedure of product development and design, three drafts are conceived by using design method and the best is chose. The chosen draft is designed in detail. The size is decided by man-machine analysis. The color is decided by color analysis. The materials are decided by mechanical properties. The ultimate presentations and engineering drawings are drown by using design software like Pro / E, 3D-max. The model is made to test the design. Finally, a campus tool instead of walking has designed for the current campus traffic. Key words Campus traffic, The tool instead of walking, Man-machine analysis 攀枝花学院本科毕业设计（论文） 目 录