cisco ospf讲解跟其排错资料教材.pptVIP

路由表错误原因 1: Network Type Mismatch 网络类型不匹配 2: Wrong Address Assignment in DUAL Serial Link Setup 双广域网连接线路中IP地址分配错误 3: One Side of Point-to-Point Link Included in Wrong Majornet or Subnet 4: One Side Is Unnumbered and the Other Side Is Numbered 5: Broken PVC in Fully Meshed Frame Relay Environment 6: Forwarding Address Known via an External Route 7: Distribute List Is Blocking the Routes 除去个别的CASE中是由于配置错误或物理线路中断引发路由表错误以外，最有可能出现的原因有： 原因一 网络类型不匹配 1、使用show ip ospf interface查看网络类型 2、在接口下使用ip ospf network 命令统一网络类型 3、在网络中，如果一个结点为multipoint，其余为sub-interface子接口，则必须统一配置为broadcast 原因