Optimal design of anchor cables for slope reinforcement based on stress and displacement fields 基于应力场和位移场的边坡加固锚索优化设计.pdfVIP

Journal of Rock Mechanics and Geotechnical Engineering 7 (2015) 411 e420 Contents lists available at ScienceDirect Journal of Rock Mechanics and Geotechnical Engineering journal homepage: Full length article Optimal design of anchor cables for slope reinforcement based on stress and displacement fields Guanghua Yang a, b, c, d, *, Zhihui Zhong a, b, Yucheng Zhang b, c, Xudong Fu a a School of Civil and Architectural Engineering, Wuhan University, Wuhan, 430072, China b Guangdong Research Institute of Water Resources and Hydropower, Guangzhou, 510610, China c Geotechnical Engineering Technology Center of Guangdong Province, Guangzhou, 510640, China d Emergency Technology Research Center of Guangdong Province for Public Events, Guangzhou, 510640, China a r t i c l e i n f o a b s t r a c t Article history: How to determine reasonable position and length of anchor cable is a frequently encountered but not Received 19 January 2015 well addressed problem in slope reinforcement projects. In this paper, the variable-modulus elastoplastic Received in revised form strength reduction method (SRM) is used to obtain the stress field, displacement field, and factor of 16 April 2015 safety of slope. Slope reinforcement using anchor cables is modeled by surface loading, i.e. different Accepted 17 April 2015 distributions of surface loading represent various reinforcement schemes. Optimal reinforcement Availa