采用深槽螺旋波纹管的折流杆换热器传热与流动数值模拟.pdfVIP

采用深槽螺旋波纹管的折流杆换热器传热与流动 数值模拟 刘佳驹，刘伟 (华中科技大学能源与动力工程学院，武汉 430074) 摘 要：本文采用数值计算方法，以水为流动介质，研究了采用螺旋波纹管为换热管的折流杆换热器传热与流动的综合性能， 并与传统采用圆管的折流杆换热器进行对比。结果表明，采用螺旋波纹管的折流杆换热器能有效提高综合强化传热性能，其EEC 值可达1.28。 关键词：深槽螺旋波纹管；折流杆换热器；数值模拟；强化传热 中图分类号： TK124 文献标识码：A A numerical study on heat transfer and flow characteristics of rod-baffle 1 heat exchangers with spirally corrugated tubes v 3 LIU Jia-Ju, LIU Wei 9 (School of Energy and Power Engineering, Huazhong University of Science and Technology, Wuhan 430074, China) 0 0 0 Abstract: This article presents a numerical simulation on heat transfer and flow characteristics of the rod-baffle heat . 2 exchangers with spirally corrugated tubes. Results are compared with those in rod-baffle heat exchanger with plain 0 8 tubes. Simulation results show that the rod-baffle heat exchangers with spirally corrugated tubes can improve the 1 overall thermal performance, and the EEC value can archive 1.28. 0 Key words: spirally corrugated tube; rod-baffle heat exchanger; numerical simulation; heat transfer enhancement 2 [5] : 物理模型 ：螺旋波纹管外径为16mm ，槽深为3mm， v i 折流杆间距为120mm，折流杆直径为5.5mm，换热器 X 0 前言 长度为1000mm，壳程直径为144mm。采用圆管的折 a n 折流杆换热器由于其制造与安装方便，重量与 流杆换热器中，圆管直径为16mm，其余几何参数不 i 成本更低，广泛应用于工业生产各个领域当中[1-4] 。 变。为简化计算，