基于虚拟仪器的溢流阀性能计算机辅助测试系统设计 测控技术与仪器专业论文.doc

基于虚拟仪器的溢流阀性能计算机辅助 测试系统设计 作者：xxx （xxx机械工程学院测控技术与仪器专业062班级，xxx 723003） 指导教师：xxx [摘 要] 在JSP-04E型液压实验台上实现由液压泵、溢流阀、调压阀组成的溢流阀性能测试系统。传感器从液压回路中获取压力、流量信号，再由研华的数据采集卡进行采集，然后由LabVIEW从采集卡将信号采集到程序界面，进行溢流阀静态和动态性能测试，从而得出系统所需的测试值。主要用到的虚拟仪器软件就是LabVIEW，用到的采集卡就是研华公司生产的PCL-818L。本次设计依托 LabVIEW操作平台组建了流量、压力测试系统，并在图形化编程语言 LabVIEW 环境下编写了实现信号采集与处理以及曲线拟合的子程序，并给出了详细的溢流阀性能实验的测试与控制过程的虚拟前面板及程序框图。并在此基础上对实验结果进行了分析、讨论。虚拟仪器在溢流阀性能测试上的开发应用，提高了实验过程的自动化和智能化水平以及溢流阀性能的测试效率和精度。 [关键词] 虚拟仪器 ; 溢流阀 ; 采集卡; 测试与控制 Based on virtual instrument of relief valve performance —Test system design DangYanBo （Grade06, Class2, Major Monitoring and control technology and instrument, School of Mechanical engineering, Shaanxi University of Technology, Hanzhong, 723000, Shaanxi） Tutor: YanGuoying Abstract: Realization of the hydraulic pump, relief valve and pressure regulator composition of relief valve performance test system in the JSP-04E hydraulic test bench. Sensor gain the pressure and flow signal from hydraulic loop, by the data acquisition card of Advantech collecting. And from the acquisition card by LabVIEW will signal acquisition to programming interface, for relief valve static and dynamic performance testing. The use of virtual instrument software is LabVIEW, PCI-818L is a acquisition card, which is used and produced by Advantech. This design relying on LabVIEWs operating platform we set up the flow and pressure test system. And has written signal acquisitions and dealing with subprogram and the test research under the environment of language LabVIEW. Take performance experiment of the relief valve as an example and give detailed course of test and control in the front board and procedure block. We have analyzed and discussed the experimental result on the basis of this. The development application on the relief valve performance testing of the virtual instrument has improved the automation and intelligent level and test efficiency and precision of the relief valve performance testing of the experiment course. Keyw