曲线交汇条件下弯道水流水力特性试验研究-Atlantispress.pdf

International Conference on Education, Management and Computer Science (ICEMC 2016) Bend Flow under the Conditions of Curve Intersection Study on Hydraulic Characteristics of the Curve Meng Jia College of Water Conservancy and Hydropower, Hebei University of Engineering, Water Conservancy Project, Handan, Hebei China 410664339@ Keywords: Curved corners junction; Model test; Inflow angle; Circulation intensity; The ratio of discharge Abstract. The flow structure is complex near the curved junction, in previous studies, relatively few studied tributary skew curve river and water sports is more complex due to the centrifugal force under this condition. In order to deeply understand the flow structure based on generalized model test, studied at the different of inflow angle and the ratio of discharge, the flow structure nearby curved corners junction area. Research results show that, when inflow angle is larger, effect of tributaries on the mainstream is getting stronger, vertical average velocity reaches the peak appears at the concave bank in downstream section. The more uneven the distribution of flow velocity becomes with an increase of inflow angle of the overall. When inflow angle becomes larger, Circulation intensity becomes more and more strength, the sections with the largest circulation intensity appears at the concave bank in downstream section is moving downward gradually. 曲线交汇条件下弯道水流水力特性试验研究 贾猛 1.河北工程大学 水电学院、水利工程，中国 河北 邯郸 056038 a410664339@ 摘要：曲线交汇口附近水流结构复杂，在以往的研究中，对支流斜