汽车基础造型讲课资料.pptVIP

Chapter Nine;To start your SURFACES drawing, go to new drawing, choose PART. Once the Part screen appears, click on START, choose MECHANICAL DESIGN, and then WIREFRAME and SURFACE DESIGN. New icons will appear, and these are the ones you will use for your SURFACE drawings.;The first thing you will want to do is layout your guide lines. You can do this by choosing POINT from the toolbar, and putting them where you need them. ;Choose LINE from the toolbar, and the Line Definition dialog box will appear. ;Choose the ZX plane and then click on SKETCHER. It is here that we are going to put in the