自定义滤波器直接综合及网络转换.pdfVIP

Designing Custom Filters using Direct Synthesis and using Network Transforms With examples from the new book Filter Synthesis Using Genesys S/Filter, Artech House, Norwood, MA, 2014 The Conventional Method Most filter programs today use methods developed in the 1950’s. A lowpass prototype is scaled by impedance and frequency. For highpass, bandpass and bandstop, transformations are also applied. [1] Matthaei, Young, and Jones, Microwave Filters, Impedance Matching Networks, and Coupling Structures, Artech House, Norwood, MA, 1980 Randy Rhea Susina LLC oscillatordesign@ June 2014 Slide 4 Slide 4 Genesys Programs That Use Conventional Methods Genesys includes a variety of these tools, that are integrated into an environment with schematic entry, layout, circuit-theory simulation and electromagnetic simulation. The Genesys modules used for conventional filter design are: • PASSIVE FILTER: lumped-element lowpass, highpass, bandpass and bandstop filters in a wide-variety of types. • EQUALIZATION: designs all-pass group-delay equalizers for all filters designed in the Genesys suite or for S-parameter data. • ACTIVE FILTER: designs filters that use operational amplifiers and R-C elements. • MICROWAVE FILTER: a wide-variety of distributed filters in electrical, microstrip, stripline, slabline and other forms. Genesys also includes tools for matching, signal control devices, mixers, oscillators, phase-locked loops, transmission lines, and system design.